ecu

[91cb7h23]

does any one know what the code for the ecu for the f22b dohc non vtec?
i am in the middle of a motor swap and the 5 speed swap i just need the right brains to run this swap.

[deevergote]

P39? Not positive, but I think that might be it.

[91cb7h23]

do you know were i could find one ? i need to finish this car asap. thanx

[TheFennell]

You can use the H23 ecu.

[d112crzy]

You can use the H23 ecu.

but you'll have to wire in a knock sensor.

P39 is a super rare ECU. I've seen them go on ebay for $200+!

Read close to the bottom of the first post where it explains all your ecu options.

[NAiL05]

but you'll have to wire in a knock sensor.

P39 is a super rare ECU. I've seen them go on ebay for $200+!

Read close to the bottom of the first post where it explains all your ecu options.

Yes they are and as I recall Iamthegirl (something like that) was selling p13. Dunno if she comes back on nowadays.

[tn_accords]

if you are really desperate you can use a pt6 if you need it running for the moment but i wouldn't run it long with that ecu.

[deevergote]

A P06 would work well with proper tuning, wouldn't it? Jose, isn't that what you run?

You HAVE to modify it, though. You can't run a stock Civic ECU with a Prelude motor!

[prNonVtec4u]

if you are really desperate you can use a pt6 if you need it running for the moment but i wouldn't run it long with that ecu.

you can actually run it no problem, you just won't get the most out of it, i'd REALLY recommed running the pt6 and hitting up d112crzy or MRX for a chipped ECU w/ a decent map