Damn,axle problem

[Puertorican_CB7]

DAAMMNNN, I was installing my H&R on yesterday until I reach the front right,FKN AXLE CAME OUT BY MISTAKE AND WONT GO BACK!!!!!,any advice on this?,cause im very mad and I'm about to get ride of the CB,and im serious damn,theres an Autoshow today and DAMN!!!

[jhondayaaj]

I believe you are talking about the inner cv joint right?? if you are, good luck with it, y ou may have to dissassemble the inner joint to get the bearings back into joint. good luck.

[Puertorican_CB7]

Damn I got it fixed,OMFG H&R are the best (when u change from cheap ebay coilovers to good springs),but damn the ride feels so great now,i can barely feel the bumps and other stuff of the road.

[cpl hero]

i had that happen to me when I was installing my eibach springs. I hope the car is on a lift? It makes it way easier. All I can suggest that you do is pull the boot back on the joint, grease up the joint and the shaft real good and finess it back in. You have to hold the C/V teeth together as you ease it back in with a slight twist. Hope that helps somewhat.

[cpl hero]

Damn I got it fixed,OMFG H&R are the best (when u change from cheap ebay coilovers to good springs),but damn the ride feels so great now,i can barely feel the bumps and other stuff of the road.

Cool, you got it in, you had to finess it in huh?! I had that same thing happen to me dude. Once I figured out how to get it in i felt so stupid

[Puertorican_CB7]

Damn,I was about to explode cause there was no way until I got it in,but Damn,now it feels so good,4 real,havent felt that good on my cb sience stock days!!!!