Hey guys. I got a problem and i need some opinions! Ok Last SaturdAY I took the Noisey Cricket (thats my 93 accord lx name 
long story) out to the local meet up area. Drove it around for about an hour no problems. I raced an Acura Integra ( beet him!), a 96 mustang (beet him) and then a little civic hatchback. The first run on the civic i took him. When we lined up to run back. I launched and ran it up and when i went to shift in 2nd the shifter went loose. The car wont shift into any gears!! Nothing. Ended up reaching under and pushing it into 2nd and drove home. Sunday i take a look and the tranny mount came out!. Not broke just the bolt came out. Also the the shift cable closest to firewall had come apart. The cotter pin and bushing came off. We replaced the mount and re attachjed the linkage but the cars stil not hitting gear. I tightend it up by the shifter and nothing. I took a look at my friends cb7 and i notice that the arm thing sticking out of the tranny that the shify cable hooks up to moves alot before going in gear. His moves just a little before going in gears. Mine moves alot almost hitting the wheel well. It still wont shift from in the car. It feels like it hits 1 3 or 5 but grinds when i let off the clustch to engage, but i have to drop it to lets say 4 to go in neutral. The car starts from the clutch and the pedal is normal. My friend thinks its the shift linkage. I was thinking maybe tranny? But by hand i can sink it into some gears. 1 and 2 for sure. What u think before i call cothorns or ammco and get raped!
long story) out to the local meet up area. Drove it around for about an hour no problems. I raced an Acura Integra ( beet him!), a 96 mustang (beet him) and then a little civic hatchback. The first run on the civic i took him. When we lined up to run back. I launched and ran it up and when i went to shift in 2nd the shifter went loose. The car wont shift into any gears!! Nothing. Ended up reaching under and pushing it into 2nd and drove home. Sunday i take a look and the tranny mount came out!. Not broke just the bolt came out. Also the the shift cable closest to firewall had come apart. The cotter pin and bushing came off. We replaced the mount and re attachjed the linkage but the cars stil not hitting gear. I tightend it up by the shifter and nothing. I took a look at my friends cb7 and i notice that the arm thing sticking out of the tranny that the shify cable hooks up to moves alot before going in gear. His moves just a little before going in gears. Mine moves alot almost hitting the wheel well. It still wont shift from in the car. It feels like it hits 1 3 or 5 but grinds when i let off the clustch to engage, but i have to drop it to lets say 4 to go in neutral. The car starts from the clutch and the pedal is normal. My friend thinks its the shift linkage. I was thinking maybe tranny? But by hand i can sink it into some gears. 1 and 2 for sure. What u think before i call cothorns or ammco and get raped!
Comment