GS-R Swap

[JDM_CB7_TX]

OK guys I know you can swap an h22 with no problem. However what would I need to do a GS-R swap. It is a gs-r block with a si head. aftermarket everything practically.

[Dr.B&Mz.MelZ]

OK guys I know you can swap an h22 with no problem. However what would I need to do a GS-R swap. It is a gs-r block with a si head. aftermarket everything practically.

so i see u got the "POOR MAN'S TYPE-R" but no B-Series ain't gon work in cb7 or other accord besides the 86-89 model.....those are better of with civics integra's or crx homie!get an H22!

[FASTESTCB7inQNZ]

its not worth it.. that motor is 2 small 2 pull that heavy ass cb7... save dat motor for a civic or integra, and get a h22 for the cb7.. trust me.. i have a h22 and i b spankin gsr's, si's, ls/vtec's.. and my motor is completey stock internally... just a few little bolt ons.. if u wanna sell that motor 2 get a h22, i might kno some1 that will want it..

[Accord R33]

what would I need to do a GS-R swap.

A civic or integra shell

[Accord R33]

its not worth it.. that motor is 2 small 2 pull that heavy ass cb7... save dat motor for a civic or integra, and get a h22 for the cb7.. trust me.. i have a h22 and i b spankin gsr's, si's, ls/vtec's.. and my motor is completey stock internally... just a few little bolt ons.. if u wanna sell that motor 2 get a h22, i might kno some1 that will want it..

Thats bullshit. Its more of an ease of installation problem. my b18c has just as much torque as an F22, it would move an accord just fine.

[NAiL05]

Thats bullshit. Its more of an ease of installation problem. my b18c has just as much torque as an F22, it would move an accord just fine.

Same goes for a d16 =P. Just not as fast.

[91 EX-R]

you COULD pull it off, but it probably wouldnt be worth it. the b series engines are made for smaller cars. i mean, sure, it wouldnt have a problem moving an accord, but you would see none to very little power gains. plus you would have to install the whole thing by custom makin new mounts, linkage and other things.

you can just make it easier on yourself and get a different f or h series engine. they swap right in and have enough torque to move the accord along fine.

dont get me wrong, the b series are great engines they just werent made for our cars. just drop that thing into a EG and blow people away.

[HondaB18]

Its not a direct swap.

And thats that. There have been countless discussions on this, feel free to search for them if you want to know how it goes.

[d112crzy]

do it.

[F22HB]

do it.

x2

[Bboy_Trevstuh]

Build it and boost it and than put it in the cb7!

[cali-racer]

its not worth it.. that motor is 2 small 2 pull that heavy ass cb7... save dat motor for a civic or integra, and get a h22 for the cb7.. trust me.. i have a h22 and i b spankin gsr's, si's, ls/vtec's.. and my motor is completey stock internally... just a few little bolt ons.. if u wanna sell that motor 2 get a h22, i might kno some1 that will want it..

x2!!!!!!

[jhondayaaj]

anything is possible, when you have money of course.

[newjdmdriver]

Im with the rest of the cb7 family, just swap with an h22 or if you want to do something that not to mANY peps do then just drop in a K24

[JYardBandit]

Thats bullshit. Its more of an ease of installation problem. my b18c has just as much torque as an F22, it would move an accord just fine.

def, it confuses me when people say the B series cant move a cb when it has almost the same amount of torque and a hell of a lot more hp... sure the h22 has .4 liters more, which is quite a bit, but the B series could destroy an f22, the only problem is getting a B motor with an F or H tranny