88 accord help?

[91f22a]

Well I was going to get a 91 accord lx with a 5 speed but the guy has sole the car to someone else, so my only option at the moment is an 88 accord. I don't know much about it yet but what optiond do I have with it? I know theres not much as far as an aftermarket for the a20a. Is is hard to swap an h22a into it? What other possibilities are there?

[NAiL05]

Check out 3geez.com best 3rd gen community. You can do H22A but takes more work. More people do b series swaps since they are light enough and yea.

[cb7owner]

do a b21a swap from a 88 to 91 prelude
thats what my buddy did its a drop in and go setup

[NAiL05]

do a b21a swap from a 88 to 91 prelude
thats what my buddy did its a drop in and go setup

???I think you mean B20A...Anyway those arent really that great of a motor. They are bastard motors that have even less aftermarket support. Do a B series civic/teg swap. You gain more from it. Or if you feel like it build you a frank or ls/vtec.

[91f22a]

Thanks for the info guys. We'll see how it goes. I don't have the car yet. Are there any bolt on parts available at all?

[cb7owner]

theres 2 prelude engines b20aand the b21a they arent bad if you know what to do to them there is cams and stuff for them

[NAiL05]

I see. I would still roll with a newer B series. More market for the newer ones than the old ones.

[NAiL05]

Thanks for the info guys. We'll see how it goes. I don't have the car yet. Are there any bolt on parts available at all?

Most cars should have the basic bolt ons such as your intake, header, and exhaust. Usually they have it for most of the cars in the world so shouldnt be hard to find at all.

[cb7owner]

the only problem i see with the newer ones is alot of work needed to swap in the b21a has 140 hp and is a drop in and cheap to pick up and mild boltons give it bout 160 easly it is a fum motor then the other b series dont have as much low end grunt