Announcement

Collapse
1 of 2 < >

ANY BUYING/SELLING IN THIS FORUM WILL RESULT IN AN INSTANT BAN!

Read the rules: http://www.cb7tuner.com/vbb/showthread.php?t=43956

Myself, and the other mods have been very nice and lenient with the rules. We have been deleting threads, and giving out warnings. Some members didn't get the clue and re-posted over and over... Now ANY member buying or selling in this section will be banned... No IF's AND's or BUT's.
2 of 2 < >

Beginner Forum Rules - EVERYBODY read! (old and new members alike!)

Beginners start here. Once you have 30 worthwhile posts (off topic doesn't count) you may post outside of the Beginner forums. Any "whoring" (posting simply to raise your post count) will return your count to 0, or result in a ban.

These are the rules. Read them. Live by them.

1) Absolutely NO flaming! "Flaming" is an outright attack on a member. ALL questions are encouraged to be asked here, no matter how basic. Members with over 30 posts will be subject to a ONE WEEK ban if caught flaming in this forum (and yes, moderators can read deleted posts). Members with under 30 posts will be subject to a ONE DAY ban.

2) Use appropriate language. Racial or sexual slurs will not be tolerated. A ban will be issued at the discretion of the cb7tuner.com staff.

3) No items may be sold in the Beginner forums. Any "for sale" threads will be deleted.

4) Temporarily banned members will be PERMANTLY banned if they are found posting on another account.

The rules can and will be added to. Any updates will be marked in the title.

The rules for the overall forum can be found here:
http://www.cb7tuner.com/vbb/forumdisplay.php?f=144
Read them. You will be expected to follow them.
See more
See less

Right high beam

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    Right high beam

    Isn't working... I checked the connection, its deffinently getting a good connection between the bulb and the harness. It cant be the bulb because it just stopped working about a week ago on my projectors. I just got my car back from paint today and I put on the stock headlights and the high beam still isnt working... any suggestions?
    Tags: None
    #2
    ok so you checked and ur getting good conn between bulb and harness.... so this problem is on your projectors and your OEM lights??

    check your fuses....i think there is fuses for hi and low beams under the hood...the fuse box on the passanger side by the glass....

    Comment

      #3
      I'll check the fuse box tomorrow when its light outside, but if the fuse was bad wouldn't both be out, or did honda put one for each high beam?

      Comment

        #4
        i think there was one for each side/drivers/passenger but i might be wrong.

        Check them and if not its gotta be faulty wiring...

        Comment

          #5
          Check the wiring for your pigtails. I've had to replace two already. The wires strip easily which can cause a short.

          Comment

            #6
            get a digital multimeter, see if you have power and ground where the headlight bulb plugs in with the high switched on, if not see if you have power in the wiring before it hits the pigtails as described above. you should be able to rule out a bad bulb or connector if this checks out.
            FA1
            355

            Comment

              #7
              Hey guys, I just thought I would add something. The right high beam still isnt working, and both sides are blinking fast when I do my turn signals.
              Also I checked all my fuses and they're all good

              Comment

              Previous template Next
              Working...
              X