okay i want to remove my valve cover so i can change the gasket and possibly put in a new cam seal... 1. where exactly is the cam seal is it on the timing belt side or the side where the dizzy is? 2. can i get to the seal by just taking the valve cover off?
3. okay what kinda tool do i need for this job i used a regular 3/8" drive ratchet with a socket and the bolt wouldn't turn for shit...
4. do i have to torque everything down if so to what lbs?
5. the balance shaft seal i want to change also.. do i just take the timing belt cover off and slide in a new one?
thanks guys..
3. okay what kinda tool do i need for this job i used a regular 3/8" drive ratchet with a socket and the bolt wouldn't turn for shit...
4. do i have to torque everything down if so to what lbs?
5. the balance shaft seal i want to change also.. do i just take the timing belt cover off and slide in a new one?
thanks guys..
Comment