no fire

[CB7Junkie]

i need some help. i bought my 91 lx from a used car lot. very very clean inside and out. broken camshaft. paid $500 for the car . i replaced the whole head b/c a new camshaft from honda is $300. now im ready to crank but i cant get any fire to the plugs. the module is new and the coil tested good in the distributor. i checked the wires going into the distributor and they all have power. no fuses are blown. does anyone have a clue what it could be??

[customchord]

Did you check the condition or the rotor button and dizzy cap.

[NAiL05]

Next thing I would look at would be the ignitor if the coil and such tested good. Your rotor and cap wouldnt be a bad thing to look at.

[CB7Junkie]

thanks. both rotor a cap are new as well. what is the igniter???

[rlyons]

thanks. both rotor a cap are new as well. what is the igniter???

Why the double post? See your other post.

[NAiL05]

Its inside your distributor should be held in my two phillips head screws.

[joba356]

thanks. both rotor a cap are new as well. what is the igniter???

Could be your problem, i had same situation and turns out it was the igniter, Its like a small chip like device inside the distributor, cost like $90 in autozone but i heard does don't last more than 3months, I just got a whole new remanufactured distributor and car started right up.

[CB7Junkie]

Could be your problem, i had same situation and turns out it was the igniter, Its like a small chip like device inside the distributor, cost like $90 in autozone but i heard does don't last more than 3months, I just got a whole new remanufactured distributor and car started right up.

thanks, im trying to find one used bc i just dont have the $ to get a new one.