Announcement

Collapse
1 of 2 < >

ANY BUYING/SELLING IN THIS FORUM WILL RESULT IN AN INSTANT BAN!

Read the rules: http://www.cb7tuner.com/vbb/showthread.php?t=43956

Myself, and the other mods have been very nice and lenient with the rules. We have been deleting threads, and giving out warnings. Some members didn't get the clue and re-posted over and over... Now ANY member buying or selling in this section will be banned... No IF's AND's or BUT's.
2 of 2 < >

Beginner Forum Rules - EVERYBODY read! (old and new members alike!)

Beginners start here. Once you have 30 worthwhile posts (off topic doesn't count) you may post outside of the Beginner forums. Any "whoring" (posting simply to raise your post count) will return your count to 0, or result in a ban.

These are the rules. Read them. Live by them.

1) Absolutely NO flaming! "Flaming" is an outright attack on a member. ALL questions are encouraged to be asked here, no matter how basic. Members with over 30 posts will be subject to a ONE WEEK ban if caught flaming in this forum (and yes, moderators can read deleted posts). Members with under 30 posts will be subject to a ONE DAY ban.

2) Use appropriate language. Racial or sexual slurs will not be tolerated. A ban will be issued at the discretion of the cb7tuner.com staff.

3) No items may be sold in the Beginner forums. Any "for sale" threads will be deleted.

4) Temporarily banned members will be PERMANTLY banned if they are found posting on another account.

The rules can and will be added to. Any updates will be marked in the title.

The rules for the overall forum can be found here:
http://www.cb7tuner.com/vbb/forumdisplay.php?f=144
Read them. You will be expected to follow them.
See more
See less

How do i install speedsensor?

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    How do i install speedsensor?

    My instument cluster is working, the rpms and fuel, but my speedometer say the same when I accelerate, new speed sensor was acquired, now how do I install it? need some help please...
    Never mind tha Slowprocess...Its more progress...DarkVader
    R.I.P
    90' CB7 project in Progress.....
    F22A
    CAI
    Headers
    EXhaust
    Tags: None
    #2
    I'd pick up a Haynes or Helms shop manual. They'll have nice pictures and well-written steps telling you how to replace it ^.^
    93 EXR
    In the works ^.^

    Todo:
    Blower Unit replacement
    Climate Control Knob replacement
    Deck install
    SRI install
    New Brake Pads
    Rotor regrind
    Wheel polishing
    New struts (?)
    New springs

    Comment

      #3
      Originally posted by DarkVader
      My instument cluster is working, the rpms and fuel, but my speedometer say the same when I accelerate, new speed sensor was acquired, now how do I install it? need some help please...
      try this website it tells you where is located and how to installed:
      http://autorepair.about.com/library/a/1i/bl845i.htm#
      ~3L BLaCkOuT~

      Comment

        #4
        thanx
        Never mind tha Slowprocess...Its more progress...DarkVader
        R.I.P
        90' CB7 project in Progress.....
        F22A
        CAI
        Headers
        EXhaust

        Comment

          #5
          It's not the nicest job, the location is a pain to get to.
          Make sure you remove your intake tubing, anything that will get in your way.
          The VSS is on top of the transmission, as that link says.

          Here are some tips though, as i've replaced 2 of them:

          Get angled wrenches, a towel, flashlight/well lit area and patience.
          You should also buy a bottle of power steering fluid as surely you will lose some when you remove and install.
          Keep an eye out on your P/S reservoir.

          Good luck!

          1990 Accord Lx F22a1(Daily) SOLD - will be missed
          1990 Prelude Si B21a1 (Fun car!)

          Comment

            #6
            THe VSS is just the top part I dont think he needs the whole shaft. Just take off the two top 10mm bolts if I remember and pull off. There is a lil key in there you can replace it with the new one that comes with the kit or whatever. MAKE SURE EVERYTHING IS ALIGNED BEFORE TIGHTENING AND IT IS SITTING FLUSH. If you tighten it and its not aligned and you overtighten the thing you risk snapping where the bolt holds the sensor in. After that just plug in you should be good. I just used a ratchet and a decent extention to pull it off.

            The New-ish Ride
            My old Ride
            Hear my Vtak!!!
            MK3 Member #3
            I piss off people for fun.
            IA 08 Sunburn Victim #1

            Comment

              #7
              yeah take ur intake tubing off and u should get to it no problem. when i swapped my tranny i had to switch that. my car is a 91 lx and the tranny i got is a 93 i think ex and they had different connectors so i hope u got the right one.
              oh the bolt kinda weird one once u get ur socket on it it is a breeze to pull off.
              hope u have no trouble at it!
              1991 White Accord LX 5-speed aka Lil' Red

              Comment

              Previous template Next
              Working...
              X