coil plug wires what they mean?

[92coupex]

what does the yellow one, the yellow and black, and the all black with white stripe mean?

is the all black one a negative?

i have a msd blaster 2 coil and it only has a positve and a negative hook up and searched around the forum and read up that you can splice the yellow and yellow and black one together. help is appreciated.

[Caution]

what does the yellow one, the yellow and black, and the all black with white stripe mean?

is the all black one a negative?

i have a msd blaster 2 coil and it only has a positve and a negative hook up and searched around the forum and read up that you can splice the yellow and yellow and black one together. help is appreciated.

neg on the msd coil to ground of car or the black wire cuss it is ground. Im assuming you meant the Yellow and black would be black yellow, cuss there is no yellow black in the manual. Im sure you meant yellow/black. That would go to the positive. And that is also the yellow wire. So, black wire to neg on coil and yellow wire to positive on coil, there, you got it!

[92coupex]

theres three wires. a black and yellow one and yellow and a black with white stripe the black with white stripe is negative and the yellow and black and the black and yellow are both positive so i can splice those two together and hook them both up to the positive and the black and white one goes to the negative?

[kricket]

http://www.msdignition.com/forum/sho...ghlight=accord

hope this helps a 97 accord non v-tec is a f22a1 so its still the same setup as our cars