so i jus swapped an f20a in my 92 accord lx, my old tranny bolted right up to this, but my old axel(the one bolts on the engine to the tranny on the driver side) does no fit, which one would i be able to use, the car is running i jus need this so i could be done....any suggestions?????
-
http://www.myspace.com/509cubanpapi
92 cb w/jdm DOHC f20a
11 sec all motor crx in the works
-
you half shaft should bolt up to the block as normal...are you sure its in all the way>?
Formerly 91AccordExR33
11.68 @ 127mph
417whp/375wtq
Sold: 8/2016
-
well i haven't really looked at it, i'm gonna take a look at it today after work, but i had it at a shop and the mechanic was the one that told me it didn't fit, i don't know i think he's an idiot though,so i brought it home yesterday..i was told it should fit though??http://www.myspace.com/509cubanpapi
92 cb w/jdm DOHC f20a
11 sec all motor crx in the worksComment
-
it will fit...only reason i see it not working is if its not in all the way
Formerly 91AccordExR33
11.68 @ 127mph
417whp/375wtq
Sold: 8/2016
Comment
-
is it going in all the way??? give more detail of problem, another thing make sure the spring clip is there and not damage, without it the cv wont stay in and just comes right out.
Not my fault my dick only fits magnums.
Why drink and drive when you can smoke and FLY?Comment
-
after i get this little problem fixed how would u compare this motor to the f22a1?? would kind of times do u think i will make in this motor compared to the 16.05 i made in the f22a1??http://www.myspace.com/509cubanpapi
92 cb w/jdm DOHC f20a
11 sec all motor crx in the worksComment
-
depends man....its a lil more whp, just depends on ur driving. You'll notice how freely it revs and where your powerband moved....just get used to it, and try ur best...i see you in the high 15's if its a DOHC
Formerly 91AccordExR33
11.68 @ 127mph
417whp/375wtq
Sold: 8/2016
Comment
-
would it be best to run an h23 ecu instead of my stock lx ecu??http://www.myspace.com/509cubanpapi
92 cb w/jdm DOHC f20a
11 sec all motor crx in the worksComment
-
oh and it did fit, idiot mechanic just messed up the thread on the block so i hade to rethread it, but engine feels alot smoother then my stock one thankshttp://www.myspace.com/509cubanpapi
92 cb w/jdm DOHC f20a
11 sec all motor crx in the worksComment
-
kool, you punning the pt3 or the h23 ecu? h23 might be ok, but you'll throw a code for a knock sensor i think. I used a PT6 from a f22a6, or if you can find the infamous PT2, then run it
Formerly 91AccordExR33
11.68 @ 127mph
417whp/375wtq
Sold: 8/2016
Comment
-
not sure what the numbers are to the ecu i'm running right now, all i know is that it's my stock lx ecu, what's the pt2 or pt6 off of?? would it matter, performance wise if the h23 ecu throws the knock sensor code??http://www.myspace.com/509cubanpapi
92 cb w/jdm DOHC f20a
11 sec all motor crx in the worksComment
-
wut's the pt3 off of??http://www.myspace.com/509cubanpapi
92 cb w/jdm DOHC f20a
11 sec all motor crx in the worksComment
-
where could i find the pt2?? and how good would the engine run with an h23 ecu??http://www.myspace.com/509cubanpapi
92 cb w/jdm DOHC f20a
11 sec all motor crx in the worksComment
Comment