Is a Td07 to big for our motors, would it have lots of lag??

[Accordballz]

What do you people think about a td07 turbo?

[gofaster]

a good rule of thumb is to use a turbo that came from an engine of similar displacement to the engine you intend to turbo. Using a turbo from an engine bigger than your engine. For example sticking a turbo meant for a Surpa on an F22 is a bad idea, lots of lag. So I guess it all depends on the size of the engine the turbo is meant for. I'm not terriblt familiar with the TD07 unfortunately so sorry maybe someone else can help.

[Accord R33]

a good rule of thumb is to use a turbo that came from an engine of similar displacement to the engine you intend to turbo. U

thats not really a good rule of thumb...factory turbos are terribly undersized. They try to create an illusion that the car has more torque than it really does, making the car "seem" faster than it really is.

if you really want to know what size turbo to use, you need to do the compressor map calculations. luckily they have already been done for the F22, and the better turbos include the t3/t4 57+ trim, t3 super 60, and even the big 16g is a good choice. This of course is a "general" calculation. things differ according to your engine, and goals. (i.e you might want to go smaller for AutoX, where you might want bigger for drag)

as far as the turbo you are refering too, you would have to do the calculations to really see how efficient it will be, and where it will make its power