St suspensions rear anti roll sway bar install help

[6chambers]

i can’t understand where this sway bar goes as i’m looking under the cad and there isn’t even one there do i have to modify the subframe becuase there’s no holes to bolt it in and no mounting points on the oem coil overs. The car is a fully stock 92 LX. need help asap please

[Raf99]

Only the EXR in Canada and the SE? In the USA had the holes/tabs for the sway bar. Same cars that came with rear disc brakes. (Don't quote me...but I think that's what you are referring to).

[6chambers]

i have drum brakes in the back and i’m looking at the install instructions and they confuse me a lot

http://docs.stsuspensions.com/DGBT/51120.pdf
im stuck on number 4 and i don’t understand what it’s saying to do

[Raf99]

Sounds like it would be close to this install - https://www.cb7tuner.com/vbb5/forum/...ay-bar-install
Also #4 just talks about the 17mm bolts that hold the OEM rear sway bar on, which you don't have. So you either have the OEM setup and this is a plug and play or non-OEM and you're doing what the link is i posted.

[6chambers]

i finally got everything on after a couple hours and i was wondering what the tour was specs are for the bar. it doesn’t say what they are.

[UnicornHondaSE]

Would love to see pics of the final result! My bro's is a '91 SE so I think it has a sway bar. Any idea on the size of OEM vs the ST?

[ShipOfTheseus]

Only the EXR in Canada and the SE? In the USA had the holes/tabs for the sway bar. Same cars that came with rear disc brakes. (Don't quote me...but I think that's what you are referring to).

I've got a US spec EX and it has rear discs. Not sure if that changed between production years.

[6chambers]

[6chambers]

Would love to see pics of the final result! My bro's is a '91 SE so I think it has a sway bar. Any idea on the size of OEM vs the ST?

Sorry for the late reply. There posted, but if there shit tell me ill go retake them. dont look at the muffler rust tho....

[6chambers]

Would love to see pics of the final result! My bro's is a '91 SE so I think it has a sway bar. Any idea on the size of OEM vs the ST?

Also if your accord does have a sway bar, the stock is 14mm and the st suspensions is 21mm. It was the first mod i did on my accord, Its def worth the 200 bucks. If you decide to buy it hmu with questions on installing it. I spent almost 3 hours tryna understand the instructions lmao.

[UnicornHondaSE]

Awesome! Thanks, the pics are fine, but it looks like the bar is touching the exhaust pipe. Probably only the angle of the photo

Thanks for the info too on bar width, that's a huge difference.

Have you noticed a significant improvement in cornering stability?

[6chambers]

Awesome! Thanks, the pics are fine, but it looks like the bar is touching the exhaust pipe. Probably only the angle of the photo

Thanks for the info too on bar width, that's a huge difference.

Have you noticed a significant improvement in cornering stability?

The bar has like a milimeter of clearance,i dont know if its becuase of the exhaust being rusted af and bending or if its the actual sway bar. But i saw that the sway bar is supposed to be able to support up to a 3 inch so idk. But when i first installed it, It def made the car feel alot more stable and connected. But I havent really have gotten a good test on like curvy roads nd such. But when i do ill say how it feels.