So I did my compression today, I rented a tool but I dont know how I would do a leak down.
Any how the compression came back with 120 or so across the board for all cylinders.
I let the motor crank over approximately 7 sec for each cylinder. Not sure if thats the way I should have done it but thats the way I did.
I thought I purged the cooling system as well and the idle dropped to the appropiate level and when I put the fuses back in it went to idleing like ass.
It starts at 3k and gradually goes down to 2k then bounces from 1500-2k. This is SHIT!
Helps guys.
Any how the compression came back with 120 or so across the board for all cylinders.
I let the motor crank over approximately 7 sec for each cylinder. Not sure if thats the way I should have done it but thats the way I did.
I thought I purged the cooling system as well and the idle dropped to the appropiate level and when I put the fuses back in it went to idleing like ass.
It starts at 3k and gradually goes down to 2k then bounces from 1500-2k. This is SHIT!
Helps guys.
Comment