I didnt wanna just start pulling shit out lol what all do i have to take out with the cruse controle. Do i just leave the wires and plugs or what?
Announcement
Collapse
1 of 2
<
>
ANY BUYING/SELLING IN THIS FORUM WILL RESULT IN AN INSTANT BAN!
Read the rules: http://www.cb7tuner.com/vbb/showthread.php?t=43956
Myself, and the other mods have been very nice and lenient with the rules. We have been deleting threads, and giving out warnings. Some members didn't get the clue and re-posted over and over... Now ANY member buying or selling in this section will be banned... No IF's AND's or BUT's.
Myself, and the other mods have been very nice and lenient with the rules. We have been deleting threads, and giving out warnings. Some members didn't get the clue and re-posted over and over... Now ANY member buying or selling in this section will be banned... No IF's AND's or BUT's.
2 of 2
<
>
Beginner Forum Rules - EVERYBODY read! (old and new members alike!)
Beginners start here. Once you have 30 worthwhile posts (off topic doesn't count) you may post outside of the Beginner forums. Any "whoring" (posting simply to raise your post count) will return your count to 0, or result in a ban.
These are the rules. Read them. Live by them.
1) Absolutely NO flaming! "Flaming" is an outright attack on a member. ALL questions are encouraged to be asked here, no matter how basic. Members with over 30 posts will be subject to a ONE WEEK ban if caught flaming in this forum (and yes, moderators can read deleted posts). Members with under 30 posts will be subject to a ONE DAY ban.
2) Use appropriate language. Racial or sexual slurs will not be tolerated. A ban will be issued at the discretion of the cb7tuner.com staff.
3) No items may be sold in the Beginner forums. Any "for sale" threads will be deleted.
4) Temporarily banned members will be PERMANTLY banned if they are found posting on another account.
The rules can and will be added to. Any updates will be marked in the title.
The rules for the overall forum can be found here:
http://www.cb7tuner.com/vbb/forumdisplay.php?f=144
Read them. You will be expected to follow them.
These are the rules. Read them. Live by them.
1) Absolutely NO flaming! "Flaming" is an outright attack on a member. ALL questions are encouraged to be asked here, no matter how basic. Members with over 30 posts will be subject to a ONE WEEK ban if caught flaming in this forum (and yes, moderators can read deleted posts). Members with under 30 posts will be subject to a ONE DAY ban.
2) Use appropriate language. Racial or sexual slurs will not be tolerated. A ban will be issued at the discretion of the cb7tuner.com staff.
3) No items may be sold in the Beginner forums. Any "for sale" threads will be deleted.
4) Temporarily banned members will be PERMANTLY banned if they are found posting on another account.
The rules can and will be added to. Any updates will be marked in the title.
The rules for the overall forum can be found here:
http://www.cb7tuner.com/vbb/forumdisplay.php?f=144
Read them. You will be expected to follow them.
See more
See less
removing cruse controle
Collapse
X
-
While you're down there, might as well take out the box that holds the CC electronics. It's just over the driver's left foot.
Vacuum the floor first - whatever dirt is on there will wind up in your hair during this operation.
Originally posted by 4CYLPOWER92 View PostSo there are 2 10mm bolts holding the CC box in place. Remove those and slide the box out of the way.
Here is the CC Box dropped down by the foot rest.
Comment
-
these instructions were on a different thread i had it saved on my desktop.
1. go to your gas pedal. unhook the cable at the very top of the pedal.
2. go to your engine bay. unbolt the circular thing. 2 or 3 bolts.
3. unhook the plug.
4. go to your firewall where the cable goes into, and twist that piece then pull cable out.
5. put a rubber cap over the vacuum line on the intake manifold. should be on the back.
6. done....
Comment
-
Originally posted by otto07 View Postthese instructions were on a different thread i had it saved on my desktop.
1. go to your gas pedal. unhook the cable at the very top of the pedal.
2. go to your engine bay. unbolt the circular thing. 2 or 3 bolts.
3. unhook the plug.
4. go to your firewall where the cable goes into, and twist that piece then pull cable out.
5. put a rubber cap over the vacuum line on the intake manifold. should be on the back.
6. done....
ok done but i didnt have to take anything off my intake mani unless you meant the one in my firewall behind my intake mani
Comment
Comment