Tips on H22A swap

[deevergote]

I'd go for the $1799 package with the matching transmission, but its your call.

Ultimately, this is YOUR car... so do what YOU want. Don't make your decisions based on what other people say, without thinking it through completely yourself.

[tutsuo]

I'd go for the $1799 package with the matching transmission, but its your call.

Ultimately, this is YOUR car... so do what YOU want. Don't make your decisions based on what other people say, without thinking it through completely yourself.

i saw the 1700 package but i cant afford it right now, if the engine is a direct bolt in ill have to work the with the tranny issue as it comes..

[deevergote]

Did you read the "sticky" threads in the Swaps section that show the details of the H22 swap?

[tutsuo]

Did you read the "sticky" threads in the Swaps section that show the details of the H22 swap?

yup and re-reading right now, will the the accord tranny bolt in to the h22a, i didnt see that in there, i see how to tap the prelude tranny nice DIY btw

wow thats gunna be an insteresting jump in power.. f22a1(135hp) to h22(200hp)

EDIT : ok so apprantly the only problem im gunna have is the wiring and theres a nice DIY for that too

[cbh23]

yup and re-reading right now, will the the accord tranny bolt in to the h22a, i didnt see that in there, i see how to tap the prelude tranny nice DIY btw

wow thats gunna be an insteresting jump in power.. f22a1(135hp) to h22(200hp)

EDIT : ok so apprantly the only problem im gunna have is the wiring and theres a nice DIY for that too

All h/f trans bolt in. You only tap the trans if it's a h manual. The wiring is in the swap information. Good luck!

[tutsuo]

All h/f trans bolt in. You only tap the trans if it's a h manual. The wiring is in the swap information. Good luck!

allrighty i will be buying the h22a long block/ecu, and most likely the wireharness for the simplicity of installation

have u guys heard of woodfins.com ? a mechanic and my local honda dealer told me to go here and the prices look amazing

[deevergote]

allrighty i will be buying the h22a long block/ecu, and most likely the wireharness for the simplicity of installation

have u guys heard of woodfins.com ? a mechanic and my local honda dealer told me to go here and the prices look amazing

What are you looking to get from that site? I've never heard of it.

As for the wiring harness, don't plan on swapping harnesses. That's not how it's done, and it's definitely not the easiest way to do it.

[GhostAccord]

have u guys heard of woodfins.com ? a mechanic and my local honda dealer told me to go here and the prices look amazing

They want $2500 for an H22 at that site.

[tutsuo]

What are you looking to get from that site? I've never heard of it.

As for the wiring harness, don't plan on swapping harnesses. That's not how it's done, and it's definitely not the easiest way to do it.

i started looking at F series again and they want like 600 for a full F22AX shipped, and the wire hareness im sure ill end up using the DIY, i got to take my fellow cb7 owners advice u know

They want $2500 for an H22 at that site.

yea i saw that but there F22As are pretty decent.
----------------------------------------------------------------------------------------------
hmotoronline.com :
So far, this is the best deal i found
http://hmotorsonline.com/shop/sc2000...age&item=30029

and there customer service is amazing called never got a machine always got a person and even have a tech call me to answer all my questions.

[GhostAccord]

Slow down, read the information and allow some time to digest. You are trying to get into this swap way to fast and you are all over the map here. Doing this without knowing what engine is what is messing you up. Take some time and do some deep reasearch into the engine and the swap before you keep posting questions about three different engines.

[deevergote]

Take your time, do what you want to do. The amount of effort it will take to swap engines is considerable for a beginner (or costly, if someone else does it), so get the one you'll want under the hood of your car. Don't get something you don't really want just to save a few bucks.

[tutsuo]

well i would like what i know F22A1, but H22A is same price more power and its a direct swap other then wire hareness. and im having a honda tech put it in


edit, just talked to honda tech he said its a direct swap other then ecu and wiring only problem is my budget it 1500 right now and he said its just over 1500 so he try and figure something out

[mtnbikaah]

don't forget the timing belt, tensioner, balance shaft belt, plugs, wires, cap, wires, rotor, balance shaft seals, front main seal, rear main seal, clutch, throw out bearing, etc. (i'm probably forgetting a few things...)

it adds up fast.

[tutsuo]

don't forget the timing belt, tensioner, balance shaft belt, plugs, wires, cap, wires, rotor, balance shaft seals, front main seal, rear main seal, clutch, throw out bearing, etc. (i'm probably forgetting a few things...)

it adds up fast.

http://hmotorsonline.com/shop/sc2000...age&item=30029

hmm ? i called and they said ready to go pop it in wire it in/fluids abd ur good to go.

[mtnbikaah]

did you read about the warranty? or do you not want a warranty....? or peace of mind knowing you won't have to change those things once the engine is in?

http://www.hmotorsonline.com/shop/warranty.html

seals and belts dry up from sitting for 10+ years....