So, my drivers side automatic belt stopped working properly today.
I checked the fuse, it was fine.
I swapped it out with a new fuse, no effect.
I tried removing the positive battery cable to reset everything, but that didn't work either.
If I force it to the rear position, it goes right back to the front position if I open the door. So, it has power.. theres not obstructions blocking it... what am I missing here? Is there some kind of sensor that has failed?
I have been searching the archives for a good hour and a half.
Just so you know, taking it to a dealership is the last thing I want to do, as the nearest dealership is 2 hours away
I checked the fuse, it was fine.
I swapped it out with a new fuse, no effect.
I tried removing the positive battery cable to reset everything, but that didn't work either.
If I force it to the rear position, it goes right back to the front position if I open the door. So, it has power.. theres not obstructions blocking it... what am I missing here? Is there some kind of sensor that has failed?
I have been searching the archives for a good hour and a half.
Just so you know, taking it to a dealership is the last thing I want to do, as the nearest dealership is 2 hours away
Comment