Looking for a TRUE short shifter

[myslowcb7]

i am looking for a true short shifter PSPEC and 4bidden have stoped producing them so i want to know if there are any others on the market
thanks

[islandhopper]

Careful, buying and selling is not allowed in the beginner sections. Might want to edit your post and read the rules again. Just FYI.

As for the short shifter, all i know of that's on the market right now are adapters, such as OBX...
I've been looking for a true short-shifter as well but haven't found any..at least from a reputable dealer. Im thinking about welding one up of my own design.

[plee3]

i am looking for a true short shifter PSPEC and 4bidden have stoped producing them so i want to know if there are any others on the market
thanks

Not that I know of at the moment. I see them time to time on our classified section. Do you know what you need to do to enter the classified section?

[quickangel93]

I miss yeamans shifter. It was the best shifter made for the cb7. If I could get ahold of one I could make them for a bunch of people

[Leung]

I miss yeamans shifter. It was the best shifter made for the cb7. If I could get ahold of one I could make them for a bunch of people

I remember those, kind of wished i bought one too.

[TypeG]

I miss yeamans shifter. It was the best shifter made for the cb7. If I could get ahold of one I could make them for a bunch of people

all you do is cut it and re-weld it?


you looking for a shirt shifter or short throw shifter? later.

[myslowcb7]

no i dont know how to get to the classified

[Leung]

no i dont know how to get to the classified

read this

http://www.cb7tuner.com/vbb/showthread.php?t=73267

[myslowcb7]

read this

http://www.cb7tuner.com/vbb/showthread.php?t=73267

i dont have permission but how do i get permission?

[quickangel93]

i dont have permission but how do i get permission?

you got to wait for 30 or 50 posts.

[quickangel93]

all you do is cut it and re-weld it?


you looking for a shirt shifter or short throw shifter? later.

if you want a short one then yea cut off a inch or inch and a half off the middle of the shifter.

if you want then throw to be shorter then you gotta make a bracket

[myslowcb7]

well thanks for the info i am going to try and make a braket for it i looked at pic of the 4bidden one and alot of people like that one so i will tru to copy his braket cause thats what shortens the throw is the higher cable position i just wont have as heavy of a shifter but i will still keep looking for a used one

[deevergote]

Read the damn rules.


All a short shifter does is relocate the cable mounting point. A $2 Home Depot bracket will do the same thing as a $200 "real" short shifter.

The Yeamans shifer was simply a copy of the Fushigi shifter... both of which were nothing more than a stock shifter with a new mounting point welded on. Nothing fancy. Nothing "real" about it. Just the same as an adapter, only welded on instead of bolted. Whoopdeedoo.

Short shifters USUALLY result in notchy shifter operation, which actually makes it take longer to shift gears, and could result in damage to the transmission. I even over-revved my engine due to an inaccurate shift thanks to my short shifter. I put it back to stock, and couldn't be happier.