H22 turbo CV axels

[Supergenius]

Are the Prelude axles really any stronger than Accord axles?

They won't work on a CB7. They're too long. You can make hybrid axles using half Accord and half Prelude... but not many have had luck with that.


IF you launch, especially with slicks, you can destroy an axle quickly. However, if you accelerate carefully, you won't put too much strain on the axles.

Yes the internals of the joints are WAY bigger in the lude CVs... The "sliders, or bearings" in theem that slide in the grooves in the cup are way bigger than the accord stuff. They are also squareish instead of round, theres more surface area.


The hybrid CB7/BA4 trip takes a litlle grinding to get it to work right as the accord axles are the same diameter, but indeed shorter lengthwise. Also of note is sometimes depending on what bolts are on the hub retainers (The 12mm on the rear of the hub)... You need to change to the 10mm 12pts off of the lude or grind down the 6pt 12mms to clear the outside of the biigger lude axles ;O)

For some lude outers (passenger side), you need to use a washer on the outside to take up the extra 1-2mm of exposesd splining.

Its working for DRQPQUT though.... Also Mitch has a set in his BA4 Lude making over 600 for over 2 years now onthe same set. H had to use the CB axles as well since the 4th and fifth gen lude axles are too long for his shit too.

For CD5s the length is perfect :O)



Saves me alot of cash in that department for other shit the car needs on a regular basis... Like tires.... HAHAHAHAA


As for launching... If you PRELOAD the axles correctly it takes sooooo much snap torque off of them. You get away with ALOT that wasy... I have hammered the shit out ogf mine for years and as mentioned, broke gearsets before the axles. Havent gbroke one yet, not even at the track :O)

[deevergote]

wouldn't that preloading be the reason the transmissions got borked?
Something has to take that instant hit!
But yeah, you're right. Preloading before a launch definitely helps save axles. And motor mounts. And kidneys.

[Supergenius]

wouldn't that preloading be the reason the transmissions got borked?
Something has to take that instant hit!
But yeah, you're right. Preloading before a launch definitely helps save axles. And motor mounts. And kidneys.

My car doesnt wheel hop no matter HOW hard I shake the tires off the hit or on shifts. It pisses DRQPQUT off howwell the car rides and drives under power... On kill It feels like its floating and almost drives itself.

[flcb7]

Why the fuck can't you just let it go. Fuck I'm sitting on the dealership right the fuck now getting a DS axle. Let the shit go noob haha

bwahahahahahahaha!!!!!!!!!!!!!!!!!!!!!!!!!!
Spiker your now a noob!!!! LMFAO!!!!!!!!
Spiker as long as I known ( 5 years or so) has been on top of his game...that just how long I have been getting info from him. I'm sure he has been around longer than that in the honda game. How would a noob have his car ALL over the i-net with the shit he has accomplished??? Please explain I would love to know. If you doubt look on honda tuner "sleeper accord" also look on ESP site (one of cb7tuners sponsors) for his work. Far from noob bro. Get your facts straight son be4 you start bashing ppl. I have mad respect for Spiker he knows his shit and has NEVER steered anyone wrong with ANY of his info. Yes his accord is bad ass if you doubt that then your fucking retarded. I back this man up b/c I know his work so do others who know him. Try learning something from this man instead of trying to be better than him with the knowledge you preach. Just cus he has a LOW post count doesn’t make him a “noob”