turbo f22a1 piston?

[slowaccord]

I'm looking for forged pistons for my f22a1 using stock rods and not having to sleeve it... any ideas? links please i can't find anything! i'll be running 10-15psi on it also

[theSOB]

bisimoto.com

[slowaccord]

all i get is a header and a cam, please let me know how you can find more f-series stuff off bisi.com cause that's all it's been showing me

[theSOB]

Bisimoto.com
-Sport Compact
--Engine
---Pistons
----F-series Pistons

[quaidum]

iirc, you cannot use forged pistons and stock rods the wrist pin is not the same

[slowaccord]

Bisimoto.com
-Sport Compact
--Engine
---Pistons
----F-series Pistons

did that...still leads me to nothing...it shows f-series pistons, but nothing to click or even be clicked to view or purchase...damn

[slowaccord]

iirc, you cannot use forged pistons and stock rods the wrist pin is not the same

yeah, my bad on that one I wasnt thinking..would a je and eagle rod combo be a good choice? my motors completly apart waiting for pistons and rods..

[deevergote]

JE and Eagle would work fine.

Another option is to actually pick up the phone and call Bisimoto. Just because it's not on the site doesn't mean they can't do it for you.

[randull]

I has teh pistons!

LOL, jk guys, we have pistons for your f22 application, feel free to call me at the shop or email me:

Randy@bisimoto.com

We currently have 8.2:1, 10.5:1, and we have a set of 9:1 with longer rods!

Let me know which setup interests you and I will help you as much as possible!

cheers
randy

[theSOB]

I has teh pistons!

LOL, jk guys, we have pistons for your f22 application, feel free to call me at the shop or email me:

Randy@bisimoto.com

We currently have 8.2:1, 10.5:1, and we have a set of 9:1 with longer rods!

Let me know which setup interests you and I will help you as much as possible!

cheers
randy

do you no longer have 12:1 for f22?

[deevergote]

do you no longer have 12:1 for f22?

I would guess that he's listing only the compression ratios that would be good for turbo... 12:1 is NOT a safe compression ratio for turbo! (it can be done, but I wouldn't want to try it!)

[theSOB]

I would guess that he's listing only the compression ratios that would be good for turbo... 12:1 is NOT a safe compression ratio for turbo! (it can be done, but I wouldn't want to try it!)

that would make a lot of sense. by this time i had all but forgotten what the OP's plans were

[deevergote]

Yeah, i scrolled back to the first post before replying just to make sure I had the right thread!

[randull]

do you no longer have 12:1 for f22?

We do have access to those, but they would custom pistons which would be $640.

Our 8.2:1 and 10.5:1 are $460. And our 9:1 piston/rod combo is $769 shipped

Let me know if there is anything else I can assist you with!

Randy
Randy@Bisimoto.com

[slowaccord]

Thanks for the help guys I found a set of arias low compression pistons that I just ordered for a decent price 515 shipped with pins rings and whatnot