roh swap

[bmxfelon420]

I was wondering, what are my options for a junkyard ROH swap? Id like to swap parts from the same car if possible, would a prelude work? Sorry i didnt search, its saying "fatal error". I know TAS has these, but im trying to save money as this is my DD and id rather it be easier to work on.

[JaberCB7]

i know your trying to save bur if you think about it, getting it at a junkyard youll prob spend somewhere between $100 to $175 not including the calipers but dont quote me on that and also get new pads....so really $150 to $200 and alot of work to get the hubs off after its all said and done. Or you can spend an extra $150 and get ALL the parts new and virtually no work ....no worries about squeeks, rattles NOTHING But thats just me, theres alot of members that do conversions and use all used parts and not have any problems...Good Luck with witchever route you choose

[old honda tek]

i think the ROH is a waste of money and time, there is nothing wrong with the factory setup anyone with half a brain can swap the rotors on a cb 7...

[Taurians' Ryde]

Oooooo k.....

i think the ROH is a waste of money and time, there is nothing wrong with the factory setup anyone with half a brain can swap the rotors on a cb 7...

Uhm...have you changed your front rotors on your car yet?

I just can not see a logical person saying "there is nothing wrong with the factory setup" once they have finished doing both sides on these cars.

I've done countless brake jobs on convensional honda's and they take all of 20 minutes and very few basic tools...CB7's...good god...what bass-ackwards-r&d-team designed this system?...lol

It goes without saying I have bought the HOR to ROH hubs, bearings and rotors already and are doing the swap when the rotors get a wobble in them.

Just surprised to read your post. That's all.

:-)

[JaberCB7]

^^^ im sure hes never done them, ive done em twice and the first time i took em apart with hammer cus i found someone selling rotors off a cd5 and after i took em out i notice cd5 had roh and i didnt

[old honda tek]

i have done hundreds in my 20 yrs as a honda mechanic it takes about an hour to do both sides if you have tools......

[xkjnboix]

i have done hundreds in my 20 yrs as a honda mechanic it takes about an hour to do both sides if you have tools......

they are designed ASS BACKWARDS and im sure 99% of the people on CB7tuner would agree on that.

lol if by "tools" you mean a welder than sure i can see that being possible.. waiittt nope nope ..nope..even then its still a PITA !

to the OP the swap isnt exactly cheap. a 2nd advantage to buying new parts is that you dont have to go through of the headache of pulling the parts needed and risk damaging them. either way you look at it, its just plain easier and reliable to get new parts. the oem parts on there now have lasted 18+ years, buy new ones and have them last for another 18+ ::

[Chrisisiced]

Changing rotors is a pain in the ass with the conventional cb7 setup but I dont think swapping to rotor over hub is really worth it unless you are also upgrading to the larger rotors from prelude vtec with 23t calipers and brackets. Realistically if this car is just a DD you shouldn't be replacing rotors too often.

[JaberCB7]

Changing rotors is a pain in the ass with the conventional cb7 setup but I dont think swapping to rotor over hub is really worth it unless you are also upgrading to the larger rotors from prelude vtec with 23t calipers and brackets. Realistically if this car is just a DD you shouldn't be replacing rotors too often.

pretty much, when i got my cross drilled rotors after i noticed how hard they were to replace i just got new wheel bearing, rotors, pads and brake hardware kit and swapped everything out in one shot, but i do wanna get roh because my ebay rotors dont look so good (still work just looks like shiet) and i found some name brand ones for a few dollars more of what i paid for the ebay ones and they come powdercoated around the surfaces that dont come in contact with the pads

[bmxfelon420]

Yeah i was thinking the same thing with the brake upgrade, if swapping the whole knuckle off of a prelude vtec would work, i would look into that. I'm all for more performance, but being that i live in an apartment and i dont have room for a ton of tools id prefer to make maintenence easier. What years of car would i be looking for? I'm in no hurry, but if i have to take it apart once, id rather improve it in some way.