Bolts wont come off catalytic convertor

[PointBlank]

Cutting wheels for dremels are prone to break easily. If my memory serves me a pack of 5 is around $10 at Home Depot, or most hardware stores. 5 would be plenty.

Just make sure the dremel doesn't bounce around and hit something and the wheel should last.

[Sequence]

Used a torch today and got mine off. And they were pretty damn bad.

[kellogg_racing_]

HEADER IN!
What saved us in removing the nastay bolts!!

That's what I used. We tried PB Blaster, no luck. We then used this stuff and they came right off. That fact that we used an impact wrench helped too...

EDIT: Just saw you got them out, any other time you can't cut them, try this!

[Vex]

That's what I used. We tried PB Blaster, no luck. We then used this stuff and they came right off. That fact that we used an impact wrench helped too...

EDIT: Just saw you got them out, any other time you can't cut them, try this!

where can I get a bottle of those?

Im only 17 so I cannot buy stuff the stores think that im going to be using as drugs.

Im gonna use my dremel today and try and see if that works. The bolt isnt to long so it should work out.

[kellogg_racing_]

You can get this for around $10 at Ace I know for sure. Just call around. Your age won't be a problem. Don't worry.