help on h22 into honda accord with hoses

[envy]

im in the middle of a jdm h22a swap into a 1992 honda accord non v tec, and just wonder what combination have people used when you want to keep your powersteering and a/c ... like did u use the accord or prelude and what hose did u have to use to make it fit correctly?...... sorry if these questions have been ask before

[cb7-tcakes]

ac bracket from f22 if you want to keep your ac, I had to remove the header heat sheild to make it fit. Power steering I had my hose custom fitted, top line was prelude mated to bottom accord line.

[NJ_STAMPEDE_LX]

I bought the whole line and pump from honda,... Might be getting rid of it soon lol not for weigh reduction I just dont like the fact that I'm feeling the fluid and not the road plus it unsafe considering I drive on the parkway alot which if I do less than 70MPH I get pulled over for driving too slow lol

[4GAccordH22]

All of the AC components from the F22, we never opened the system. As for PS, I used the H22 pump and bracket and got a high pressure line from a 93-96 Prelude VTEC. Had to do a little bending at the bottom, but no issues in the 5+ years of driving it.

[AnewOasis]

I was going to do the same thing with mine. But I was clumbsy with the bending and snapped the bottom. Then I had to get a custom one. But you are completely correct. You can just get the one from the prelude and it fits with a little bending.