Maxbore H22/23 TB

[megarock15]

hey im just curious if any one on here has an H22/23 tb boredout from maxbore, if so what is it bored out to? and how thin does it look?

post some pics if you have some

[dj_eclipse_303]

i have one !!! throttle body and plenum by maxbore!!


and runners too....

[fatboy1185]

OMNI is having a sale on their TB's, about $115 shipped for a 70mm.

[dj_eclipse_303]

mines are 65mm TB and plenum....see the runners they are not acurate to the gasket which im not very happy about

[megarock15]

i have one !!! throttle body and plenum by maxbore!!


and runners too....

whats the bore on the tb? do you know?


fatboy1185 OMNI is having a sale on their TB's, about $115 shipped for a 70mm.

is this sale on the H22 TB? or will this fit an A6

[dj_eclipse_303]

65mm this is on an h23 TB might be done to a A6 TB i don't see why not.

you can send him an e-mail and ask about price cuz i don't remember; info@maxbore.com

F SERIES.
-Accord F series up to 64mm with a 67mm tapered opening.

good luck!

[fatboy1185]

I'm pretty sure F and H TB's all swap over.

[megarock15]

im going to opt for that 70mm omni for $115 then send it over to maxbore yay

and i think maxbore charges like $125 shipped for tb's

[quaidum]

I'm pretty sure F and H TB's all swap over.

h23/h22 are the same f22 does not fit on h plenum

[dj_eclipse_303]

im going to opt for that 70mm omni for $115 then send it over to maxbore yay

and i think maxbore charges like $125 shipped for tb's

stupid question but curious!!
why are you sending the 70mm omni TB over to maxbore?

[fatboy1185]

Yeah, how big do you want it lol? 70mm is pretty good sized.

[megarock15]

as big as i can

because im going to boost

and i will be using an h22 upper plenum

[megarock15]

just curious could i use a PT6 with an h22 IM? or would i need a different ECU

[fatboy1185]

70mm is plenty big, you are gonna have a lot of boring out to do on the h22 manifold to even make it a flush fit.

[megarock15]

hence the reason for maxbore