Megan headers. Has anyone ever owned them?

[dbrooks]

I've been looking for a good, easy upgrade and I'm really considering new headers. I'm wondering if any has or has tried Megan headers.

If you have let me know how they were. Did they installing easily? Did the boost performance at all? Anything.

Thanks a lot!

[motobmx105]

i have em and their good for the price, way better then some generic ones off of ebay just make sure to try and use RTV sealant on the gasket that connects to the down pipe, and as for performance if you have the f22a4 you wont really be able to tell but it helps a little.

[dbrooks]

i have em and their good for the price, way better then some generic ones off of ebay just make sure to try and use RTV sealant on the gasket that connects to the down pipe, and as for performance if you have the f22a4 you wont really be able to tell but it helps a little.

Sweet! Yeah I noticed they were a super good price too. I bet they look a lot better then that cast header on the stock f22a1. I'm pumped. I think I'm getting them

[deevergote]

Megan really isn't that much different from the generic ebay ones. Basically, that's all megan is... a generic knockoff ebay company.

No cheap header is going to give you much of a gain in horsepower. If you want a gain, you have to shell out the cash for a Bisimoto header. Anything else is really just for looks.

[Flatline]

they are okay for the price, as said before. they will also give he exhaust a slightly different tone, but thats any header replacing a stock manifold....




Double post FTL

[deevergote]

It's the stupid software... I don't know why.

That, or it's Firefox. Every other post of mine is a double!

[kirk90]

I just put a Meagen header and downpipe in my lude. I had an ebay header and downpipe in there before. The Megan header is a bit better. The flanges are thicker. I heard the only real problem is where the downpipe has that mount welded on the pipe bout halfway down. That attaches to the back of the block. It tends to break off. So I just leave it unattached. The sounds is a bit smoother and deeper than the ebay brand. The flex pipe seems to be of better quality on the Megan as well. I also use a Remflex gasket where the header bolts to the downpipe. Ive had a leak there with there gaskets they send you. Remflex gasket seems to be holding up. Oh and the Megan racing stickers have givin me atleast 5 Hp. lol.....

[honda_kid]

I heard the only real problem is where the downpipe has that mount welded on the pipe bout halfway down. That attaches to the back of the block. It tends to break off.

mine broke. got a temporary fix on it for now til my bisi header arrives.

[wed3k]

the flanges come pre-warped for all your gasket blowing needs.

[Austintizzzle]

Sorry to thread jack but how do the bisimoto header sound/perform?

[BIGsnorlax]

the flanges come pre-warped for all your gasket blowing needs.

amen . Had one for a month then trashed it, leaked after what seemed one day trip (~80 miles) . Sure it looked decent... and was cheap... but lets be real, i doubt i picked up any real amount of power for the money spent (besides of course the 25hp and 50 ft lbs according the butt dyno placebo effect lol )

[eazyduzit509]

mine broke. got a temporary fix on it for now til my bisi header arrives.

Mine too, and i just picked it up, broke the welds off the top of the DP and was loud as shit, not to mention smelly. Took it off, welded steel plates on it, threw it on with no bracket, vwalla.

[honda_kid]

Sorry to thread jack but how do the bisimoto header sound/perform?

amazing.

[Noxidea]

Same as everyone else the welds broke off the little back of the block brackets , so i took it off welded on patches .. worked fine but when I did stainless catback i replaced it with a Greddy header ... but it was decent other than that one spot ..

[xaaronx]

that little bracket never even came close to fitting on mine. it was quite a few inches from the block lol