ABS Light??

[StinkinLincoln]

Is there a way to check a ABS light for problems like a CEL???

Before Today the ABS light would only come on then I drive down the road...Now I't on when ever the car is running...WFT

How do I find the Problem??

PS....My Car needs a Master Cylinder..Buying and Installing one Friday (Pretty sure it's not the reason the ABS light is on)

[nine_deuce]

I believe you check the abs light just like you do the check engine light. Just watch for the abs light to flash, then check the code

[StinkinLincoln]

Amybody got a link with ABS codes then??

[XcluziveAZN]

if anything check to see if the sensor is cover in mud or thick dirt....that might give you the light. Clean it and see if the light go away

[StinkinLincoln]

Where are the sensors located?? Are they on the calaper brackets like most ABS systems?? The reason I ask is because I just got the car and havent been able to take the wheels off yet. (lost wheel lock key)

[XcluziveAZN]

http://www.team-integra.net/sections...ArticleID=1164

this is for integra but it pretty much the same location


it screw down onto the knuckle and should be near the axle (right by abs ring)

this picture is from other car but same concept

abs ring = round thing with teeth on them
abs sensor = the thing that hover above it


i hope this help


edit:

to take off lost lock wheel you will need slightly larger 12 pt deep socket just enough to fit over the wheel lock and hammer it in nice and tight and take it out

If you don't want to do that .....if it is an OEM wheel lock....take it to Honda they might have master key

[StinkinLincoln]

Ah...They are Tuner Lugs on some Really nice 16" Drag wheels painted to match the car...So...I'm going to have my friend at Advanced Race Tech Remove the lugs with his key and change all the lug nuts first...

Then I'll fuck with the ABS Sensors..Don't want to mess up my wheels by pounding sockets on trying to remove the old wheel locks...

[Orlando_CB7]

I have this same problem, since I bought the car, its had the ABS light on solid. I never had a car with ABS (yes I know ) but the brakes feel nice and solid (except I get a shimmy on the left front at times when stopping)...

StinkinLincoln LMK how it works out for you

[StinkinLincoln]

Yea I'm new to the ABS game myself!!

[CB7J0N]

I have this same problem, since I bought the car, its had the ABS light on solid. I never had a car with ABS (yes I know ) but the brakes feel nice and solid (except I get a shimmy on the left front at times when stopping)...

You can just remove your ABS computer non.sense and make that little annoying light turn off....
Here is a DIY if you decide to take it off:

http://www.cb7tuner.com/vbb/showthre...ight=abs+light

[nine_deuce]

http://www.cb7tuner.com/vbb/showthre...ight=abs+codes

[H22A91CB7]

explain to me what abs does again??? if it was working, what would it do