Harness bars that work with cb7?

[wherm]

I was browsing ebay and they only offer harness bars for 94 and up. Will that fit? Or is anyone using a bar from a different make/model that works with little or no modification? I tried seraching this forum but didn't have much luck...

[slick]

even though i dont have a cage i wondered the same thing

[wherm]

you don't have to have a cage, that's basically what a harness bar is for. A cage usually has provisions for a harness. No way I'm runnin a cage in my car, so the harness bar will be stand alone. I swear I saw a few on here but of course, when I want to find the thread I can't!

I just ordered the 3pt upper strut bar, traction bar, and 4pt rear strut bar from Explicitspeedperformance.net. This will stiffen up my chassis quite a bit, but won't help me for harnesses. For now I'm gonna keep using my seatbelt for track days, but would like to upgrade!

[N9netwoAccord]

i remember there being like a universal one somewhere.. i dont know if i'm crazy or if i actually remember

[wherm]

i remember there being like a universal one somewhere.. i dont know if i'm crazy or if i actually remember

Maybe you're crazy...but that didn't help much

[redssna]

You may end up needing to build your own. I'll be running a 4 point cage with a harness bar so that'll do it for me. I'm sure you could find a local shop to do it for you pretty cheap though.

[wherm]

I might make my own, we'll see. If I do, I'll post up the info on it.

[cali-racer]

i always wonder if an integra (DC) one will work. or if they make one for the DA. never got the chance to do some measurements. too bad im gonna be getting a cage.

[CustomLowz]

They get the job done. I know people with them in their cars



http://cgi.ebay.com/ebaymotors/46-51...Q5fAccessories

http://cgi.ebay.com/ebaymotors/47-Un...Q5fAccessories

[JoshM]

No pics of it in his MRT yet, but:

yeah i just installed the b-pillar harness bar. it's a 47" that fits BUT the lateral bars that bolt down towards the floor are too short, at least the bars that i got . i need to find longer bars or get longer endlinks. other than that the 47" fits perfectly .

[redssna]

If you do make you're own make sure to put uppics and some specs on it. I'm sure there are plenty of others that would be interested.

[wherm]

They get the job done. I know people with them in their cars



http://cgi.ebay.com/ebaymotors/46-51...Q5fAccessories

http://cgi.ebay.com/ebaymotors/47-Un...Q5fAccessories

Great info! I will keep these options in mind. Thanks!