f22a1 crank pulley fit a 95 h23a3

[beyonddalimit]

wondering if the f22a1 crank pulley will fit or is the same as the dohc
h23a3 non vtec series crank pulley?

[Losiracer2]

prob. will but you won't be able to use power steering since its I think 1 rib short on the pulley. Thats the problem I ran into when my p/s belts kepts shredding themselves. I used the F22A6 pulley on my H22 and it was 1 rib short, so the 4th rib on the P/S belt kept slipping off. After I changed it, no problems at all.

[beyonddalimit]

prob. will but you won't be able to use power steering since its I think 1 rib short on the pulley. Thats the problem I ran into when my p/s belts kepts shredding themselves. I used the F22A6 pulley on my H22 and it was 1 rib short, so the 4th rib on the P/S belt kept slipping off. After I changed it, no problems at all.

cool thanks. anyways i yanked out my power steering. so i shouldnt have any problems.

[Losiracer2]

cool thanks. anyways i yanked out my power steering. so i shouldnt have any problems.

oh yeah then it works perfect. just that you might need diff. sized belts if you wanna keep A/C. Thats another thing I ran into, the H22 pulley needed smaller belts 42.5 inches in length vs. 43.5 for the accord pulley.