Info on boosted f22 ecu

[keoni96826]

getting a turbo kit soon looking for info on chipped ecu's.

[coupe]

use a p28 or pr4 out of a civic or integra. and u can get it chipped with chrome with a basemap. remember a base map doesnt mean u are tuned. u still have to get it tuned. and what year is your car?

[FNEG]

i am going to be useing a hondata s200 on a chipped p30(b16)you can find them just as cheap as chiped p28's on chrome and they have some extra features such as boost cut, shift light, lauch control etc.

[keoni96826]

i have a 91 lx but should get a a6 swap with the kit. does the p28 just plug in from the old ecu connectors? thanks for the replys

[FNEG]

yes it does are you vtec??? if not then you don't need to spend the extra cash on the p28 and instead just get a po6 and in the future you can add vtec to the po6 if needed. normally po6's sell for 50-60 buck here where i am

[coupe]

chrome has boost cut shift light and launch control. and it is much cheaper

[FNEG]

for shift light, etc where is the output located at???

[trah]

for shift light, etc where is the output located at???

CEL is the output @ specified rpm.

[Accrdwgnguy]

I would go for a P06, its cheap and easy to find. You can add Vtec capability if needed later on.

It plugs right into the stock ECU harness.

[keoni96826]

what is the po6 from?

[deevergote]

92-95 Civic LX/DX

There is an entire section of this forum dedicated to ECU tuning. Check it out. It's under the Performance section.

[keoni96826]

thanks. do you know someone who is a good tuner on this forum? that i can talk to i tried to pm some but no one replys back.

[skaterdudz02]

I use a P28 Civic ECU in accord. Mine is VTEC though, so if you're running a Non-vtec motor then just get a PO6 and use Crome for tuning. I would also suggest getting a wideband!

[deevergote]

Suggest? You NEED a wideband to properly tune an ECU!

keoni96826, I don't know of any in Hawaii, but d112crzy is one of the most active members here that knows a good deal about ECU tuning.

However, most of the knowledgable members won't waste their time on questions that are already answered in "sticky" threads, or if you don't bother writing a clear question. "yo how do i 2ne dis engin?" won't get you a response. Learn what you can, come up with a legitimate question, and ask someone that knows. Show that you're actually TRYING to learn, and they'll help you. I don't know a single member of this forum that enjoys spoon-feeding people that won't bother trying to learn for themselves.

[keoni96826]

yeah ive been looking in the ecu tuning threads and im kind of figuring things of plus i ask my friends here. they kind of know some things so i learning just not everything super fast. i just got talked into going turbo so im only now learning but i just wanted to try and get everything i need to learn before i get my kit but i guess not. plus my budget is bigger than i though. i did pm d112crzy but never got back to me i guess i know why now all i wanted was prices then i can figure the rest out on my own like programs and stuff. thanks for the info and advice though.