C pillar bar install Question. HELP ASAP

[poolhall.junkie]

Oaay just received the Integra C pillar bar and i am coming up about 3-4 inches short. Whats the problem. Several people on here have made it work so what do i need to do??????????????????

[N9netwoAccord]

get longer bolts and put washers between the bar and the side of the C pillar to take up the slack

[noobcake]

what year integra did you order for

[poolhall.junkie]

what year integra did you order for

Both DA and DC2 Integra bars are the same length. The DA bar is actually shorter but I bought the DC2 bar which taps oout at 46.5 inches. I went and bought some washers and longer bolts. Cutting the plastic is the main bitch in all this. Hopefully that will work and it will not look to gaudy.

[JaK FRoSTWhiTE]

Both DA and DC2 Integra bars are the same length. The DA bar is actually shorter but I bought the DC2 bar which taps oout at 46.5 inches. I went and bought some washers and longer bolts. Cutting the plastic is the main bitch in all this. Hopefully that will work and it will not look to gaudy.

I got a DA bar and fits perfect.

[slick]

no washers need or longer bolts for the DA bar? and the DA bar is 90-93 correct?

[93accordexcoupe]

[poolhall.junkie]

Well I finally got it together after about 25 washers on each side. Something has to be wrong for others to fit and mine come up so short. DA bar i think measures at 44 and the DC2 bar goes from 44 to 46.5. Makes no sense. Its in so o well I guess. Just to figure out a way to make the square that i cut around the bar look clean. Im think about some type of molding and some cloth like a boot or something to put in the hole to hide the washers and what not. Any suggestions??????

[AbsurdNY]

Well I finally got it together after about 25 washers on each side. Something has to be wrong for others to fit and mine come up so short. DA bar i think measures at 44 and the DC2 bar goes from 44 to 46.5. Makes no sense. Its in so o well I guess. Just to figure out a way to make the square that i cut around the bar look clean. Im think about some type of molding and some cloth like a boot or something to put in the hole to hide the washers and what not. Any suggestions??????

You could get some black vacuum hose and slit it down the center then put it on the edge.

[Bcozzi71]

I got a DA bar and fits perfect.

my picture is all over this forum lol

[slick]

my picture is all over this forum lol

thats what you get for sleeping

[poolhall.junkie]

You could get some black vacuum hose and slit it down the center then put it on the edge.

Thats a good idea. For the 3x3 square that i cut into the plastic is there like a universal cut to fit type molding out there that i could use to make the square look neat? Thanks for the input.