custom made exhaust system

[mtnbikkerkid33]

I highly doubt they have a mandrel bender in the shop. Crush bent will be just fine

ok i know what mandrel bent is, but what is crush bent?

[nope]

ok i know what mandrel bent is, but what is crush bent?

sometimes it looks like these:


but i usually see it with these ridges on the inside of the bend, this is what they sell at places like autozone.


also since it's for a dd, there's nothing wrong with a 2" crush bent exhaust.
p.s. make sure you don't get a turbo muffler, i made that mistake once...and only once! lol

[Losiracer2]

I would look into a Magnaflow Street Series muffler. I've got the 14816 or 14815 I forgot, its the one w/ the 3.5 inch dual tips, 2.5 single inlet and dual outlet. I would go for the 3" dual tipped one, that looks really nice. They're about 145 if you shop around.

[C91BLX7]

Personally I would just buy an ebay stainless cat back system and hack off the muffler and put something decent on it.

[mtnbikkerkid33]

I would look into a Magnaflow Street Series muffler. I've got the 14816 or 14815 I forgot, its the one w/ the 3.5 inch dual tips, 2.5 single inlet and dual outlet. I would go for the 3" dual tipped one, that looks really nice. They're about 145 if you shop around.

where did you find yours?

[Losiracer2]

where did you find yours?

I traded my Greddy EVO2 muffler for a brand new one from a member on here. It was a good deal lol. My car sound REALLY nice now. check out my MR thread, on the first page I posted an Exhaust clip w/ my F22A6, I should do one now w/ my H22A it sounds WAY deeper, and when VTEC hits, DAMN its like i jizzed in my pants lol.

[mtnbikkerkid33]

I traded my Greddy EVO2 muffler for a brand new one from a member on here. It was a good deal lol. My car sound REALLY nice now. check out my MR thread, on the first page I posted an Exhaust clip w/ my F22A6, I should do one now w/ my H22A it sounds WAY deeper, and when VTEC hits, DAMN its like i jizzed in my pants lol.

haha i can only imagine. I want an h22 so bad! ill look for one of those mufflers though.

[mtnbikkerkid33]

hey what would happen if i put a muffler with two 4 inch tips on it?
would that kill my low end?

[dee88]

sometimes it looks like these:


but i usually see it with these ridges on the inside of the bend, this is what they sell at places like autozone.


also since it's for a dd, there's nothing wrong with a 2" crush bent exhaust.
p.s. make sure you don't get a turbo muffler, i made that mistake once...and only once! lol

what's wrong with a turbo muffler? i have a turbo2 it sounds pretty nice

[quickie70]

crush bends are fine for this type of car. Even with a small turbo or a stock H, you won't restrict the flow enough to make 1-2 HP difference at a bazillion RPM. Well worth the $$ savings IMO.

[newyorkcb7ss]

OK i got custom piping done from the cat back and the fucks forgot to put a resonator on. SO basically its like a straight pipe right! I went to the ny/nj meet and i thought it was quiet until i heard everyone elses cars! I earned my first ticket for the exhaust too! So u think i can have a resonator put on withought having to do the whole system over! and will this quiet my exhaust down quite a bit? I have a magnaflow street series muffler too. Pure sex!

[keycb7]

OK i got custom piping done from the cat back and the fucks forgot to put a resonator on. SO basically its like a straight pipe right! I went to the ny/nj meet and i thought it was quiet until i heard everyone elses cars! I earned my first ticket for the exhaust too! So u think i can have a resonator put on withought having to do the whole system over! and will this quiet my exhaust down quite a bit? I have a magnaflow street series muffler too. Pure sex!

Yes resonator helps alot, the bigger the more it will quiet down, you see on ebay exhaust it's not to long and skinny. You want to have at least 4"in diameter and 18 to 22 long, exhaust shops also call them "glass pack"
you'll notice the difference, but I guess any resonator open exhaust will make difference.

[nope]

what's wrong with a turbo muffler? i have a turbo2 it sounds pretty nice

cause turbo mufflers are made for turbo cars! they are loud as f*** on a non turbo. you might as well just cut off the muffler and be done with it lol!

:idk, maybe i'm just getting old, but i don't see the point in making your car really noisy when it's still just as slow. just sayin'