f20a dohc

[blazincb7]

hey any 1 ever know of 92-93 accord comin wit a f20a dohc
cause im buyin it asap and it looks like it was a factory motor

[blazincb7]

motor

also it was non vtec

[MikeW]

I beleive some EDM or JDM accords came with the f20a. Cant recall off the time of my head, but go for it. How much, btw?

[vtechead]

Hello

1990-1993 2.0 Si

http://www.cb7tuner.com/vbb/showthread.php?t=44639

vtechead

[blazincb7]

f20a

yea it had to have been a canadian car or some thing cause it dont look like it was swaped in or anything oh yea the car was an ex 4door wit blue leather and an auto at that i found the car in new york

[blazincb7]

f20a non vtec

any body know were this motor came from or wat car it a f20a dohc non vtec
its in a usdm or maybe a canadian car and its a auto 92-93 and also the car had blue leather also
what computer will work on this motor

[91 EX-R]

the F20A DOHC was offered in the 1990-1993 Accord 2.0 SI in Japan. the car you're looking at must have had it swapped in, because that motor was never offered here.

and there is no need for 2 threads on the same subject.

[C91BLX7]

Only F22a PGMFI engines were sold in North America

[blazincb7]

f20a

would it be worth my while to pull it out and put it in my 92 coupe 5 spd

[C91BLX7]

would it be worth my while to pull it out and put it in my 92 coupe 5 spd

If your current motor is healthy... then no.

[blazincb7]

f20a

i currently have a f22a1 wit 125hp

[91 EX-R]

i currently have a f22a1 wit 125hp

ok, but is it in good condition? if so, leave it in there and save the money. but if not, then yea, you could swap it for the F20A

[blazincb7]

f20a

well for 1 it has more hp then my current motor

[91 EX-R]

well for 1 it has more hp then my current motor

true. it does, but only 20 extra horses, and the torque is the same. you'll barely, if at all, be able to tell the difference. so unless your engine is about to go, or you can get this engine for really cheap, then just leave it as it is.

[NorcoAccord]

well for 1 it has more hp then my current motor

its not always horsepower i would consider torque to and for the money and time involved why not just do an h23 intake manifold swap.