exhaust kit and how to install?

[t34mJDM]

hey, im planning to install a new exhaust pipe on my CB7. i've been looking around and i've spotted a DC sports pipe. Im planning to buy it this june but frankly i dont know how to install it. I looked under the CB7 and i see theres like this junction where the pipe is connected to the system.....so, my question is, how am i going to install a new pipe and which brand should i get?

[DA92CB7]

As far as brand i would stick with apexi, dc, gready, skunk-2 those are the name brands ebay ones are cheap but tend to fall appart fast. An exaust install is pretty straight forward you just lift the car un bolt old/stock exaust and do the reverse for installing the new exaust.

[deevergote]

What "pipe" are you talking about?

[Djmoua]

yeah what's "DC Sports Pipe"???

[t34mJDM]

http://www.autocarparts.com/part/list/1384/
^ this is one of the DC pipes....i couldnt really find that exact one yet but I'm probably looking for an APEXi WS2

http://www.youtube.com/watch?v=3Ve_1IEDTHY
^ APEXi WS2 exhaust

[deevergote]

That would be a muffler.

[t34mJDM]

there's a difference between pipe and muffler?

doesnt muffler mean exhaust pipe? because thats what i thought it would mean thats y i use short word "pipe". sorry if that confused you

[ExplodingCake]

Exhaust pipe are the piping. Muffler is the structure at the end of an exhaust pipe.

[Zer0_92EX]

man 140 for muffler? just got buy the whole catback system and gut the stock muffler.
and if ya have the money to go buy the performance muffler, go right ahead.

but the piping is where all the performance is in an exaust, and u get what you pay for.

www.nopi.com is a good sight to see what you need or just get the idea of some exaust or other stuff. I wouldnt suggest buying unless u have a pretty penny.

[t34mJDM]

ok then, if im planning to buy the exhaust kit, is it gonna be hard to install or no? because being a beginner, iono what im getting myself into and its my daily drive so, i dont want to SERIOUSLY mess up my system

[bmxfelon420]

ok then, if im planning to buy the exhaust kit, is it gonna be hard to install or no? because being a beginner, iono what im getting myself into and its my daily drive so, i dont want to SERIOUSLY mess up my system

you'll want to be prepared to possibly heat up/cut off some bolts/ smack stuff really hard with a hammer. Rusty stuff that hangs under the car, made of mild steel is never the easiest thing to take off. I just plan on having my dremel on the ready when i do mine, i anticipate having to cut a few bolts. No problem for me, but obviously go for the wd40 first, try to get it loose, then possibly heat it up. If that still doesnt work, just cut it.