Will a cb7 rear lip fit a 93 cb9?

[1993wawita]

Any cb9's have a cb7 rear lip on there wagon?Does it fits right in? Or their has to be made some modifications? Pics will help alot

[almostJDM]

i dont think it will it will interfear with the rear hatch

[slick]

cb7s have an exhaust cut out not on the end of the bumper whereas cb9s have the exhaust cut out on the outside near the end of the bumper

[blizzard335]

i dont think it will it will interfere with the rear hatch

YO mikey, what hatch?

To the OP, do you mean the rear bumper lip?

If the rear bumpers for the sedan and wagon are similar, then yes, it would fit, but I think the wagon bumpers are longer.

Correct me if I'm wrong

[1993wawita]

YO mikey, what hatch?

To the OP, do you mean the rear bumper lip?

If the rear bumpers for the sedan and wagon are similar, then yes, it would fit, but I think the wagon bumpers are longer.

Correct me if I'm wrong

I was thinking the same thing the wagon bumpers are wider.I might try on my bros rear lip this weekend to see what happens

[almostJDM]

YO mikey, what hatch?

To the OP, do you mean the rear bumper lip?

If the rear bumpers for the sedan and wagon are similar, then yes, it would fit, but I think the wagon bumpers are longer.

Correct me if I'm wrong

ok ima noob lol for some reason i though he ment bumper

[ExplodingCake]

Sedan to wagon lips won't fit unless it gets plastic surgery.

[blizzard335]

ok ima noob lol for some reason i though he ment bumper

Yo Mikey, its cool

[1993wawita]

Sedan to wagon lips won't fit unless it gets plastic surgery.

That sucks yo I really want to see how my cb9 will look with a rear lip Im still goin to try it out this weekend to see what happens

[Chino10460]

It does not fit cause you will either have to get your muffler pipe straightened or you will have to cut the lip exhaust hole more to the right. I have a wagon lip on my wagon hopefully this helps http://www.cb7tuner.com/vbb/showthread.php?t=102714

but you do have a rear lip right? its that black thing under the bumper

[billysaccord90]

re have to redrills holes and also stand off a part or else your muffler will burn the rubvber... messing around also a rsx rear lip lines up to not without redrilling

[JoeyBoy_cb7]

as mentioned, the exhaust cut off on the wagon is off to the corner compared to a sedan/coupe. that is the only major obstacle you'll have.

yes, wagon front and rear bumpers are about an inch or so longer than sedan/coupes. but it is only longer on the upper part where it would theoretically 'bump'. the lower portions are exactly the same dimensions as a sedan/coupe. which means, a rear lip for a 9091 will fit perfectly on a wagon. but you'll have to modify your exhaust pipes to come out straight instead of to the corner. i was going to do that, at one point in time, i had a greddy evo2 catback and a replica mugen rear lip. i was going to make the exhaust come out straight. but went against that especially because i found a real cb/cd wagon exhaust.

[1993wawita]

as mentioned, the exhaust cut off on the wagon is off to the corner compared to a sedan/coupe. that is the only major obstacle you'll have.

yes, wagon front and rear bumpers are about an inch or so longer than sedan/coupes. but it is only longer on the upper part where it would theoretically 'bump'. the lower portions are exactly the same dimensions as a sedan/coupe. which means, a rear lip for a 9091 will fit perfectly on a wagon. but you'll have to modify your exhaust pipes to come out straight instead of to the corner. i was going to do that, at one point in time, i had a greddy evo2 catback and a replica mugen rear lip. i was going to make the exhaust come out straight. but went against that especially because i found a real cb/cd wagon exhaust.

Thanks for the help bro.My exhaust is off right know since it was rusty and old it came off.So you think ill have problems puttin a spoon rear lip since i have the front one already?If you dont mind what year cb is that grill from and where can i get one?