My Built & Boosted F22

[built&boostdf22]

95 accord - F22b1

BOTTOM END
Darton mid sleeves
9.2:1 Wiseco pistons .40 over
Carrillo super pro A rods
Acl bearings
micro polished & balance crank
high flow oil pump
stock headgasket

TOP END
All stock. I cant make my mind up either to build the SOHC vtec and port match the h23 intake or H22 head swap.

TURBO
Turbonetics T3T4oe
Tial wastegate
Old skool Hks BOV

Drivetrain
level 2.9 axels
fidenza 8.8 flywheel
ACT extreme pressure plate w/ 6puck racing disk
Quaife 2.5 way lsd

SUSPENSION
tokico hp shocks
hks springs
SPC camber kit (front & rear)
ST sway bars
Hasport traction bars

Other mods
550 RC injectors
GM 3 bar MAP
Drilled & slotted rotors
2.5'' all the way N1 exhaust
P28 Hondata s100
casworth shortthrow shifter
Auto meter boost guage




Now here is the pics of my unfinished Rice mobile











its a start

[fatboy1185]

nice! any idea of what power it makes?

[1990Ex]

well damn very nice i wanna see more pics but BIGGER THIS TIME

[F20A CB7]

Loveeeeeeee The Primer/ Flat blk paint

[built&boostdf22]

nice! any idea of what power it makes?

makes 233whp and 231wfpt @ 7psi





you want them this big


BTW no money for paint right now. Plus Richmond street are tearing the body all up.

[Boost_Lee]

sup man, havent heard from you in a while! Did you ever get that traction bar i found you in houston?

hey, can you get me bigger pics of your manifold/turbo. I have the same manifold and i need to plan the downpipe/piping

[built&boostdf22]

sup man, havent heard from you in a while! Did you ever get that traction bar i found you in houston?

hey, can you get me bigger pics of your manifold/turbo. I have the same manifold and i need to plan the downpipe/piping

Nah we didnt work it out.... My fault... So I called Hasport and they made me another set. I paid a little bit more, and it was well worth it in the long run.

I dont have any pics on file of close ups on the downpipe. I can get you some tomorrow or sometime.

[Boost_Lee]

thanks man, i could use them to help me mock it up

how many lbs you runnin when you dyno'd

[built&boostdf22]

thanks man, i could use them to help me mock it up

how many lbs you runnin when you dyno'd

wastegate has a 9psi spring in it, guage was showing 7-7.5 psi, I cant afford a decent boost controller yet. I would like to step up to a s300 and run their boost solenoid. Control the boost in all the gears. And once the head work is done. I would like to get to 25-30 psi, max out the turbo.

[Boost_Lee]

nice...im buildin the B1 too, hopin for 22 psi

i want to rep the SOHC hehe

how much does hondata's solenoid run?

btw those are great numbers for 7.5 psi man. these F22b's are torquey

[built&boostdf22]

nice...im buildin the B1 too, hopin for 22 psi

i want to rep the SOHC hehe

how much does hondata's solenoid run?

btw those are great numbers for 7.5 psi man. these F22b's are torquey

50 bux for the solenoid

[quickangel93]

with those mods done, i would stick with a t4 or something that big. 230hp on a built motor sounds a bit to weak.

[c mak]

nice build!! All you need now is paint! How long has it been boosting for?

[Boost_Lee]

with those mods done, i would stick with a t4 or something that big. 230hp on a built motor sounds a bit to weak.

i think his turbo choice is fine. As stated above, hes just runnin low boost due to a wastegate spring and no good boost controller. A T4 is a little much for a 4 banger that only breathes to 6Kish IMO

[NAiL05]

Dont forget too much power in the fwd is pointless your just gonna spin especially on street tire...YOu can only be effective with so much before your just fucked lol.