here's a little update on the car what has changed in the past 5 months. Thanks
[IMG][/IMG]
here she sits with some stranger at jamba juice
[IMG][/IMG]
xxr 521 16x8 +20 195/45/16 with the homies kickin it!
[IMG][/IMG]
sadly here she's sits on the 8 west freeway with a broken timing belt
i rased the car all the way up and the tow truck driver still was not too happy with me#lowlife
[IMG][/IMG]
replaced timing belt, balance shaft belt, water pump cam seal crank seal and indtalled some cheap megan headers
[IMG][/IMG]
running again like a champ. nice photo i took at mount helix
[IMG][/IMG]
getting a bath #spring valley
[IMG][/IMG]
no more fun and games -___- i lost 3rd gear in my bullet proof 5 speed wagon tranny.this transmission lasted me a long time,and held up to some abuse
[IMG][/IMG]
5 speed wagon tranny (LEFT) and rebullit h23 tranny(RIGHT) got the transmisson in it felt amazing going into 3rd gear with no grinding or poping out!!
[IMG][/IMG]
cleaned up,one weekend at half off sales down at the local junk thought id take her down there and see if i could find somthing..and sure enough..
[IMG][/IMG]
came up on some mint rear disc brakes. left and right complete $98 out the door
[IMG][/IMG]
rear disc's installed now trying to get out of my bothers drive way -__-
weeks go by runing shes runin like a champ and shifting like butter..soon enough graduation is coming around the corner.so i guess you get rewarded for graduating so i was rewarded with this...
[IMG][/IMG]
out of a automatic 93 prelude h22a1 motor was pulled out with 77.xxx miles because the transmission was going out, thats a pretty nice reward
[IMG][/IMG]
next day..... f22 is out h23 trans unbolted tranny cleaned and painted
[IMG][/IMG]
block and head some what disasabled cleaned wire brushed,then painted,replaced sonsors
[IMG][/IMG]
much better...
[IMG][/IMG]
in the mean time while i wait for my timimg parts,water pump.cam seal.crank seal,h23 manual tensioner,etc etc etc took some time and cleaned up the bay a little bit..and removed a/c lines and some others things,lookin pretty good
[IMG][/IMG]
and today i got everything i needed to put it back together.this was taken before i replaced the parts
[IMG][/IMG]
as the motor sits as of new all timing components installed,now waiting on intake manifold gasket and my vtec hareness.thats it as of now.will be puting it in some time next week but i will update this as soon as i do,thanks for your time..let me know what you think!
[IMG][/IMG]
here she sits with some stranger at jamba juice
[IMG][/IMG]
xxr 521 16x8 +20 195/45/16 with the homies kickin it!
[IMG][/IMG]
sadly here she's sits on the 8 west freeway with a broken timing belt
i rased the car all the way up and the tow truck driver still was not too happy with me#lowlife
[IMG][/IMG]
replaced timing belt, balance shaft belt, water pump cam seal crank seal and indtalled some cheap megan headers
[IMG][/IMG]
running again like a champ. nice photo i took at mount helix
[IMG][/IMG]
getting a bath #spring valley
[IMG][/IMG]
no more fun and games -___- i lost 3rd gear in my bullet proof 5 speed wagon tranny.this transmission lasted me a long time,and held up to some abuse
[IMG][/IMG]
5 speed wagon tranny (LEFT) and rebullit h23 tranny(RIGHT) got the transmisson in it felt amazing going into 3rd gear with no grinding or poping out!!
[IMG][/IMG]
cleaned up,one weekend at half off sales down at the local junk thought id take her down there and see if i could find somthing..and sure enough..
[IMG][/IMG]
came up on some mint rear disc brakes. left and right complete $98 out the door
[IMG][/IMG]
rear disc's installed now trying to get out of my bothers drive way -__-
weeks go by runing shes runin like a champ and shifting like butter..soon enough graduation is coming around the corner.so i guess you get rewarded for graduating so i was rewarded with this...
[IMG][/IMG]
out of a automatic 93 prelude h22a1 motor was pulled out with 77.xxx miles because the transmission was going out, thats a pretty nice reward
[IMG][/IMG]
next day..... f22 is out h23 trans unbolted tranny cleaned and painted
[IMG][/IMG]
block and head some what disasabled cleaned wire brushed,then painted,replaced sonsors
[IMG][/IMG]
much better...
[IMG][/IMG]
in the mean time while i wait for my timimg parts,water pump.cam seal.crank seal,h23 manual tensioner,etc etc etc took some time and cleaned up the bay a little bit..and removed a/c lines and some others things,lookin pretty good
[IMG][/IMG]
and today i got everything i needed to put it back together.this was taken before i replaced the parts
[IMG][/IMG]
as the motor sits as of new all timing components installed,now waiting on intake manifold gasket and my vtec hareness.thats it as of now.will be puting it in some time next week but i will update this as soon as i do,thanks for your time..let me know what you think!
Comment