Ebay Lights one piece

[tonka9999]

The big down fall is no adjustment and If you have not taken your bumper off and or your lights this will be a difficult install for you! i didnt include everything to install as far as removing and replacing bumper sorry

Remove black housing that OEM lights sit in!


It should look like this! before you put the lights in!


Word to the wise! WD40 before and after to make things a little easier.


You have 5 bolt locations: DON'T tighten any of them until all threaded!

Two up top:



Two at the bottom:


And one on the side:



Since there is not an adjustment screw you will have to adjust with what you have!
Using a level see where your car is sitting and adjust light using a tape measure.



This is how they look:
Parking lights:

Headlights:

[thepowderblue]

I wanted to get some of those. Did the come with light bulbs?
Now all you need is the 93-93 grille

[quaidum]

my one piece headlights(the ones just like yours) has adjusters for them they are phillips head screws on the back of the housings

if you have a picture of the back i can show you what i am talking about, unless they changed the design

[scanlessfool]

I'm sorry to hear about your downgrade in quality and light output.

[quaidum]

I'm sorry to hear about your downgrade in quality and light output.

you when i bought mine i was disappointed as well

after putting in a cheap p&p hid kit and still not being satisfied i ended up retrofitting the d2s morimoto mini's in ebay housings

[Gtseviper]

well they failed on designing of those headlights. It has no dept to it like some projector heads have. I just ditched the black housing in front and retrofit tsx projectors in mine

[quaidum]

well they failed on designing of those headlights. It has no dept to it like some projector heads have. I just ditched the black housing in front and retrofit tsx projectors in mine

that is exactly what i did, but i added some halos and made them look like angry eyes(i thought they looked pretty good)

[tonka9999]

Yeah i want to do a reto fit but im a little un sure on how to go about it and i have read the DIY but not a 100% on it. i wanted to run my HID kit that i have had almost a year now. so for now and until i get a good diy on how to retro fit they will work.

[tonka9999]

i think i did see those on the back side...how is the adjustments made thought?

[HardInThePaint]

Those are probably the worst headlights ever on the planet earth. The design sucks and the light output sucks as well. I'm not trying to clown but I'm just sayin...

and If you have not taken your bumper off and or your lights this will be a difficult install for you!

And that goes without saying, u have to do those things in order to install the headlights.

[crazymikey]

The bigger downfall is that they are 1pc Ebay headlights.