one of the few lips that looks OEM and i came across it 
the Volvo lip
there isn't that many pics of this lip but here are some good ones courtesy of SOHC-FTW
Im getting sick of my legend lip and this one appeared right on time
so ima show you how i did it (DIY)
step 1
there is 4 plastic clamps that you are gonna have to cut off. (2 on each side)
step 2
even it out with your bumper starting at the middle and drill a hole, then screw it down and keep going down the bumper
step 3
as you can see, the curves are not gonna line up exactly so you are gonna have to bend the lip into the shape of your bumper (you are gonna need allot of strength)
try to get some help, it was a pain doing it alone.
my finished product
as you can see i didn't flush the curve as good as SOHC-FTW did
but it still looks good for a 30 min job
the Volvo lip
there isn't that many pics of this lip but here are some good ones courtesy of SOHC-FTW
Im getting sick of my legend lip and this one appeared right on time
so ima show you how i did it (DIY)
step 1
there is 4 plastic clamps that you are gonna have to cut off. (2 on each side)
step 2
even it out with your bumper starting at the middle and drill a hole, then screw it down and keep going down the bumper
step 3
as you can see, the curves are not gonna line up exactly so you are gonna have to bend the lip into the shape of your bumper (you are gonna need allot of strength)
try to get some help, it was a pain doing it alone.
my finished product
as you can see i didn't flush the curve as good as SOHC-FTW did
but it still looks good for a 30 min job
My MRT
Comment