IF IT'S NOT BOOSTED IT'S SLOW!
let me know what you think of my car
let me know what you think of my car
-
IF IT AIN'T BOOSTED IT'S SLOW!
turbo G23 420hp 385tq mainstream tuning -
Dope. Its a f23 bottom end, h22 head?
**Blk Housed Slut Crew Member #1**
**Don't b scared be prepared for the worst**
Da Drizzle's Sedan - Dr. Diy's Blk Housed Thread
'90 2Tone Coupe-Car Heaven_'89 Lude-Junk Yard
Mostly Usdm, some Jdm,Edm,&Puerto Rican RICE -
nice man. why is your intercooler hanging down on one side tho?
Comment
-
It looks like the hot side feel off the fmi. Any ways 400hp =
86 4Runner - 22RE 5spd, 4" Lift, 35x12.5R15 BFG Km2's, 4.10 gears
"The Turtle"
DD/Trail Rig/Mud BugComment
-
real nice setup....
keep up the work
is that an h22 head?[COLOR=DarkRed][B]I LIVE ACCORDINGLY * 93 CB7
Comment
-
looks like a f22 dohc head.that turbo looks niceOriginally posted by F20A CB7 View Post
spoonsportsaddictComment
-
time to put the battery in the trunk!
I MISS MY CB7Comment
-
I'm such a Newbii, I can't see very well, dam sk3 screen.Originally posted by JDMchristian991 View Postlooks like a f22 dohc head.that turbo looks nice**Blk Housed Slut Crew Member #1**
**Don't b scared be prepared for the worst**
Da Drizzle's Sedan - Dr. Diy's Blk Housed Thread
'90 2Tone Coupe-Car Heaven_'89 Lude-Junk Yard
Mostly Usdm, some Jdm,Edm,&Puerto Rican RICEComment
-
Nice topmount..fix ur ic pipes so u can shove the ic up..from the looks of it the endtank outlets arnt level(offset) causing u problems...
Suggestion might be flipping it so that the drivers side is on the passenger side..
Either way nice homemade setup? Did u make the manifold yourself? If not who did? How much?
Sorry for the questions..I need a manifold for a holset vgt(big mother fucker)
Lol
Praise The Lowered...Comment
-
kool setup, dyno sheets would be awesome, I'd like to see the tq
Formerly 91AccordExR33
11.68 @ 127mph
417whp/375wtq
Sold: 8/2016
Comment
-
thanks for the love the intercooler wasnt bracketed to the car so thats why it look that way but its fixed now. yeah i put this kit together when turbos kits wasnt suffiecent enough for real power back when it was still new to alot of people the best way was to do a custom kit i was one of the frist here in atlanta to have boost on a built h23 that ran pretty good until the crank snapped back in 2002 i had the it stroked and bored out to 2.7L and boosted so after that i started to see if the head could work on a f22b2 and i made it work on the frist try and after that i got deeper into it. The turbo manifold was a manifold from south florida performance which is f-max basiclyOriginally posted by WiKKeDV16 View PostIF IT AIN'T BOOSTED IT'S SLOW!
turbo G23 420hp 385tq mainstream tuningComment
-
the intercooler is hanging cause i didnt have any brackets on it at fristOriginally posted by GenDBlade View PostIF IT AIN'T BOOSTED IT'S SLOW!
turbo G23 420hp 385tq mainstream tuningComment
-
No its a h23 head on it. the head gasket i use was a 90-93 accord head gasket it has no leaks and when i tq it down i use the sq for the 92-97 accord specs to make sure in high boost it wont liftOriginally posted by 203CB7TUNER View PostIF IT AIN'T BOOSTED IT'S SLOW!
turbo G23 420hp 385tq mainstream tuningComment
-
i dont know where you live but mainstreem performance make manifolds for 250 with the wast gate housing on them all day and they work pretty fast alsoOriginally posted by WiKKeDV16 View PostIF IT AIN'T BOOSTED IT'S SLOW!
turbo G23 420hp 385tq mainstream tuningComment
-
yeah im about to take it up to mainstreem performace and do a new tune too it i did some more up grade and im trying to get the car up to a high 400hp or 500hp and im done. i just put the dual valve springs in also so im trying to have more rpms safe when in boost i think im going to have him set it to 9k i can beat up on it and dont be scared about the valvesOriginally posted by Boost_Lee View PostLast edited by mahtogje; 12-27-2008, 04:55 PM.IF IT AIN'T BOOSTED IT'S SLOW!
turbo G23 420hp 385tq mainstream tuningComment
Comment