New Seats I Need Some Help Wiht The Brackets

[DANTECB7]

I JUST GOT THIS PAIR OF AFTER MARKET SEATS FOR FREEEEEEEEEE IM WANNA INSTAL ON MY ACCORD BUT THE Y GOT NO BRACKETS ANYBODY KNWO IF I CAN USE THE RAILS FROM MY STOCK SEATS O A EASY WAY 4 INTALATION SONTHING EASY AND CHIP

[PUMASTi]

Try to have a shop fab you some brackets using maybe your stock ones.

[cfamilyfix]

Probably the cheapest way is to remove the seat brackets from your stock seats. Then you need to make attatchment points to the new seats. Once the brackets are on the seats, bolt them into the car and see how they feel...sometimes aftermarket seats can be a little low with stock mounting brackets. Nice score for free BTW.

[angus67]

Probably the cheapest way is to remove the seat brackets from your stock seats. Then you need to make attatchment points to the new seats. Once the brackets are on the seats, bolt them into the car and see how they feel...sometimes aftermarket seats can be a little low with stock mounting brackets. Nice score for free BTW.

or insanely high.

[JDMchristian991]

http://www.andysautosport.com/honda/...t/spyder_auto/

[Losiracer2]

What I did for my racing seats that didn't come w/ brackets was I went to the JY and hacked up some seats for the rails....the only way the brackets come out....so I'd still have my stock seats if I wanted to put them back in. My friend who knows how to weld, made me some brackets w/ two cross beams outta 1/4inch steel plate. Then I used grade 8 bolts to secure them to those.

Now it works just like stock and they're at stock height. Took about a day or so to grind off all the welded nuts on the stock rails to start from a clean slate and then to make measurements for the brackets and finally well them onto the rails. Pics in my member's ride thread if you wanna see what they look like.