Now tell me i couldn't install Pioneer 6" x 8" on my Front Doors

[cvc7chris]

SORRY pics are too big


Not too hard took 2 hours for both doors

First i took the door off (drivers door)

and i unscrew the screws the hold the speaker grill in place

This is what i got


Heres' the OLD Ugly Speaker (Made in Japan)Cone tweeter Had Fallen off

It was gonna be hard to Drill it to the Metal door
and i put it on the grille and My speakers Fit Pefectly and Tight
without fallin out

So i put them on
put some Silicone Glue on there and This Gorilla tape
and it was Stuff on there for good
i put the glue on the metal side of the speaker
not hurting the actual speaker

this is what i got



yes i got a little surprise on the passenger door
Sony 3 way Speaker DAMN!!

But Sadly it was Blown and the Cone had a hole

so i replaced that one too

-cvc7chris

[cvc7chris]

This is kinda like a DIY but i couldn't post it there because i don't have enought privileges

[lokuputha]

good to know they fit, did u have to do any modification to the door?....those are 6x8? or 6x9"s?

[F20A CB7]

They are 6x8's

[Tnwagn]

Glad to know that you got them to fit.

[cvc7chris]

Mods not Really

just like

glued them to the Plastic Grille part

and they stayed on good

if you don't want to glue nothing

then they probally won't fit

unless you drill holes in the metal door

[deevergote]

Sweet! I love to see people doing new things

PM me when you get to 30, Chris, and I'll move this to the DIY forum (I would now, but you couldn't reply to questions... which would defeat the purpose!)

I'll have to give this a shot. I have some crappy paper $25 Pioneers in there now, stock size.

What does it sound like? Any buzzing or anything from being attached to the grille?

[cvc7chris]

Nope it sounds Great

It just depends on the speaker

Every Oval Speaker is Diffirent

My Pioneers just happened to fit STRAIGHT IN to the GRILLE

enough to Glue down

And thanks i'll pm you

i'll be doing other crazy stuff with my Accord Soon

[deevergote]

Cool. New stuff is always good! I've been around for a long time, and there have been plenty of times where people said "there's nothing more we can do to our cars!"... bull, I say!

I'll have to check into the same speakers... I have a Pioneer setup myself, and my CB7 sound system is terrible... I never thought so, but then I got my GTP with the stock Bose system. It's the ONLY thing I like better than the Accord!

[ilovemycb7]

I'll have to check into the same speakers... I have a Pioneer setup myself, and my CB7 sound system is terrible... I never thought so, but then I got my GTP with the stock Bose system. It's the ONLY thing I like better than the Accord!

Well I hope you get the CB stereo upgrades... can't fall behind the pontiac.

[hybrid90accord]

i have a old school rockford 7" fanatic Q driver in my door, so a 6x8 shouldnt be much work. I just hope you didnt do a hack job. I used alot of dynamat on my doors and welded up all the hole so i could get a clean solid sound

[Ralphie]

You dont have any issues with the window glass hitting the magnet?

I installed Pioneer 5.25s i believe and the glass hits the magnet so i gotta find a suitable spacer to space the speaker out enough to not hit the glass and allow the grill to fit over it.

I havent installed the pass side because of this.

[hybrid90accord]

i used 3/4" mdf as my spacers ring. and had to trim the inside of the door

[Ralphie]

i used 3/4" mdf as my spacers ring. and had to trim the inside of the door

hmmm see i didnt even think to use MDF...thats a brilliant idea....thanks man.

[GHOST 2.2]

nice mod.

i would of gone with the component system route on the fronts