Diff OHM settings, ME have NO CLUES!!

[F20A CB7]

Im workin on Gettin my system lil by lil.


15"SUB=1300 RMS ( got it)
6.5"Component=200 RMS
6x9 4Ways= 200 RMS

TOTAL=3400 watts MAX

I wanna run MONO block amp.
I was told when i got my sub to RUN it at 1 ohm for best usage.

Here are some NUMBERS:
This AMP is rated 1 OHM stable

500 Watts RMS Power into 4 Ohms
800 Watts RMS Power into 2 Ohms
1000 Watts RMS Power into 1.3 Ohms
1300 Watts Max Power into 1.3 Ohms

How will i go about the brigdin with this power out put from this amp.
What do u guys recommend me to GET this is wat im gettin as far as my system goes i jus need help on amp 2 choose wat power to get. i want a mono cuz they have more wattage. than a reg channeled amp... CORRECT me if wrong

[zelseman]

id suggest a mono amp for your one sub and then a 4 channel for your speakers

[cpl hero]

What are the specs of the sub... is it a Dual Voice Coil (DVC), what is the impediance of the coil(s).... 2, 4, 6? What's the recommended enclosures of the sub you wanna run.... Ported and Sealed? Give the specs of the sub. in ordre to truely get help!

[F20A CB7]

Cloth Laminated Paper Cone Structure
Hi-Excursion Foam Surround
4'' High Temperature Dual Voice Coil
165 Oz High Density Barium Ferrite Magnet
Power Handling: 1300 Watts RMS /2600 Watts Peak
Frequency Response: 22- 700 Hz
Impedance: Dual 2 Ohms Voice Coils
Efficiency: 88dB

[F20A CB7]

id suggest a mono amp for your one sub and then a 4 channel for your speakers

I was gonna go with that also, SUB with mono. and reg speakers with AMP

if i was to get a 4 channel amp.

wat channels do i run the 6x9s and 6.5s components
6x9=2ch?
6.5 components=2ch?

[ChIoVnIdCa]

brand name and models? of everything..... just to make sure you know if its not CEA-2006 rated it is most likely a lie..

[F20A CB7]

LANZAR OPTI EVERYTHING man

and im not BEIN an ASS but this is my THread. EVERY 1 downs LANZAR so i dont wanna hear pio this jensen etc ..

.... wats CEA-2006

[ChIoVnIdCa]

LANZAR OPTI EVERYTHING man

and im not BEIN an ASS but this is my THread. EVERY 1 downs LANZAR so i dont wanna hear pio this jensen etc ..

.... wats CEA-2006

did anything down anything?.... Lanzar is a brand and opti is a line. How about a model number on the subs, amps and speakers.

[F20A CB7]

This is my sub
http://i179.photobucket.com/albums/w...7/S5030031.jpg



MODEL# OPTI1000D ( for my sub)
Competition Class Mono Block Digital Amplifier



500 Watt 6.5'' Component System ( a lil over rated but they r nice)



340 Watts 6''X9'' 4-Way Speaker SystemMODEL# MCX69


MODEL# OPTI200X4
1600 Watt 4 Channel Competition Class Amplifier( amp for the speakers)

[F20A CB7]

did anything down anything?.... Lanzar is a brand and opti is a line. How about a model number on the subs, amps and speakers.

no 1 here said anything but in general LANZAR= old/ played out, they liek wat u have i say lanzar, they b liek huh? oo that from them days

[ChIoVnIdCa]

Run the sub in parallel (two 2 ohm loads wired in parallel equals 1 ohm) to mono
block amp

Run components to left and right front outputs on four channel (left side goes to left, right side goes to right)

Run 6x9s to left and right rear outputs on four channel (left side goes to left, right side goes to right)

[cpl hero]

^^^^^^^ Yea, like what he said, drop the impedience to 1 ohm on the sub to get the maximum usage outta it. Basically, all you are doing is hooking up both power wires together and hooking up both negative wires together (+/+ and -/-). Then bridge it across the amplifier to the 1 ohm setting.

[UrDoneSRH]

ive had this convo with you a million times it seems like lol

[F20A CB7]

ive had this convo with you a million times it seems like lol

u told me about the sub out puts. but i fig i can run everything to a mono amp, i really dont no jack squat about audio ch/ohms.

[accord junkie]

go on rockford fosgate site might not b the same brand ur using but they have a spot if u put ur sub specs it will show u how 2 wire ur sub 2 1 ohm.if u have dual 2 ohm im sure u can wire it in 2 1 ohm witch would b the way 2 go.