Hey fellas, I'm having a brain fart and I can't think of what wire to use as the remote wire (to go to amp) from the stock wire harness. There's three wires that are blue with different stripes on them that aren't used for power, ground, antenna motor, or speakers. Not sure if one of these is the "remote" wire.
If not, should I run the remote wire (to the amp) from the constant 12V wire? Or the ignition power wire (yellow/red) that only comes on when the ignition is on? Either way I usually run a kill switch between the remote and the amp. I'm gonna put some old skool Kicker 8" free airs in the back so I can get mah bumps on.
Thanks in advance.
(what wire do I run the remote wire from?)
If not, should I run the remote wire (to the amp) from the constant 12V wire? Or the ignition power wire (yellow/red) that only comes on when the ignition is on? Either way I usually run a kill switch between the remote and the amp. I'm gonna put some old skool Kicker 8" free airs in the back so I can get mah bumps on.
Thanks in advance.
(what wire do I run the remote wire from?)
Comment