HID Kit Need Help With Wiring Harness.....

[WhiteShift]

hello everyone,

just come back from junkyard and i have find a HID ballast on a EJ6 SIR.

The front end of the car was crashed and i have been unable to find other wirring on these ballast...

Someone can help me, whaT i will need to run this hid kit?

What is missed??????




First Ballast


Second Ballast:


Thanks inadvance for the HELP!!!

[HardInThePaint]

You need all the wiring pretty much, looks like all that shit is trashed. And the bulbs.

[WhiteShift]

yes man i know, thebulb is not a problem, easy to find

i think i need a relay...
this one is good... but i dont know why he has only one plug for light but 2 for ballast...




need other plug to make it work ?

[Jarrett]

Above all else, these:

[WhiteShift]

Yes dude, i agree....

but this not my question. before put projector on my car, i want make these ballast functionnal... for the projectors, i will grab somefrom an acura...

come back to main post, i will need one relay or 2?

otherwise relay pictured on the upper post, what i will need to grab?

[flatrex]

That relay harness will work. The reason there is only one plug is because it uses the power from the OEM headlight plug to flip the relay on, then the relay sends power to the 2 ballast.

[xkjnboix]

as long as they are 35w ballists, oem wiring will be ok. even if they were 55w the oem low beam bulb is 55w and the oem high beam is 65w both oem bulbs are running on a 20amp fuse in the fusebox.

looks like all you need is new bulbs and a male plug for USDM plugins.

the aux harness is optional but most will recommend.

[WhiteShift]

That relay harness will work. The reason there is only one plug is because it uses the power from the OEM headlight plug to flip the relay on, then the relay sends power to the 2 ballast.

in fact, one oem plug will be useless right?

[mtnbikaah]

correct.

[WhiteShift]

hid bulb need to be 9006????

[xkjnboix]

u need 2 =P male plugs for the usdm harness.

if you are using them for usdm then 9006 i think ( its been a while =D )

[MortsAccord]

You got bulbs to test it with?

You could always grap the wires that go to the bulb and see if they shock you, that will let you know if its getting its high voltage pulse to start the arch.

[flatrex]

Yeah 9006 is low beam

[otto07]

i pluged one of my ballasts in while my lights had power. let me tell you it was not fun. i did not think it would shock me that hard but it sure as hell surprised me.

You got bulbs to test it with?

You could always grap the wires that go to the bulb and see if they shock you, that will let you know if its getting its high voltage pulse to start the arch.

[WhiteShift]

i need one or 2 relay harness?