Subwoofer Repair

[BlitzCB7]

Is this a pain to repair? The plastic piece in the front just came off so can I just glue it back on?

[lilg4mdalbc]

It looks to me like its just the dust cap. So yes you should just be able to glue it back on. Make sure you use strong glue

[SPLCB7]

I'd buy some glue from psi hobby glue extra wont hold up very long. Here's a link http://www.fixmyspeaker.com/ProductDetails.php?pid=946

[SnTMo]

ive never had any luck with them staying on after gluing them back. good luck and do as they say and get good glue.

[NightmareCB7]

Ive had good luck with the 2 part epoxy from auto zone.

[BlitzCB7]

So is it ok to just use the sub without the dust shield.

[SPLCB7]

So is it ok to just use the sub without the dust shield.

I wouldn't. But it's your sub

[SnTMo]

So is it ok to just use the sub without the dust shield.

they eventually dont sound the same without it and its alot easier for them to get damaged without the dust shield. i got tired of blowing mine out so i started looking for something different and ended up with titanium eclipse subs.

[BlitzCB7]

I wouldn't. But it's your sub

That's why I was just asking lol

they eventually dont sound the same without it and its alot easier for them to get damaged without the dust shield. i got tired of blowing mine out so i started looking for something different and ended up with titanium eclipse subs.

I have a T1 sitting in my closet, I just want to get the right box for it before installing it

[lilg4mdalbc]

My friend had some interfires where the dust cap came off, he took em to an audio shop to get them reglued for like 5 bucks, and he still uses em. That was like a year ago

[SPLCB7]

That's why I was just asking lol

I could think of lots of reasons.... if you useing a sealed box you port out the sub ie damage. Or if its a tuned or ported box you change the hrtz of the box you'll get dust in the motor whitch could cause damage. But it could be fine for a little while I wouldn't do it. The Psi glue I linked you two is highly recomended by pros make shure you clean it well then apply the 2 parts and wight it down so it sticks. That's if you use it ill post a DIY on recones so it's avail for others to try....

[BlitzCB7]

I could think of lots of reasons.... if you useing a sealed box you port out the sub ie damage. Or if its a tuned or ported box you change the hrtz of the box you'll get dust in the motor whitch could cause damage. But it could be fine for a little while I wouldn't do it. The Psi glue I linked you two is highly recomended by pros make shure you clean it well then apply the 2 parts and wight it down so it sticks. That's if you use it ill post a DIY on recones so it's avail for others to try....

Thanks for the info bro! I learn something new everyday. Plan right now is to run just one sub and glue the cap on the other, then let it sit over night.

[WhiteGhost]

its just a dust cover,glue it on.....

[WhiteGhost]

It needs to be on there any glue will do...Plus i luv Just loud audio....If you didnt know what JL was

[sonikaccord]

Make sure you put weight on the dust cap when you glue it.