Window Trim

[mrvinyl33]

Honda still sells the run channel, and it still sells the metal door moulding and its assoc'd clips:
clips: http://www.bernardiparts.com/SearchR...0_012_0006.GIF

[93AccordLXwhite]

So honda still sells the channels? Im having the same problem, i tried to change the regu with some other ones but im still having the same problem, after moving the bolt on the left side up and down to see witch one worked leaving it down more would make it better.

do you know the best lube to clean the channels with ? my passenger side window is not going up nor down fast

I know my local Honda dealership sells the channels. I priced them and they were in the high $60.00's low $70.00's. I've been searching as to what the best lube is for the channels but haven't had too much luck. All I know is I've read that silicone/wd-40 is supposed to only be a temporary fix 'cause it gums up eventually. But man, my windows work better than they ever had with just silicone in the channels(think it's been a month or two).

[honda4674]

the channels that your ta;ling about is what the window is sitting in one the sides of the windows right not the motor or bars attached to the motors right? im lost as to what you guys mean by channels?

[honda4674]

Anyone?

[accordmaniac]

I have same problem with driverside window. Window run-channel is your problem.

[Hondateck2010]

what im talking about is were the window sits in. the tracks is what i call it. the rubber part that hows the window in place

[aznartist_34]

3M tape it up.

[93AccordLXwhite]

the channels that your ta;ling about is what the window is sitting in one the sides of the windows right not the motor or bars attached to the motors right? im lost as to what you guys mean by channels?

By channel/track I mean the rubber running up and down that the window slides between.

I call the piece that's connected to the motor a regulator.