Fog light brackets

[TriniCB7]

I recently aquired a set of fogs, however I do not have the brackets. I want to know if there is anyone out there that has installed using another bracket or some form of a home made set up. I know what the brackets look like and have basic fabrication skills, but just wanted to see if anyone has done just a common sense install with them.

[ThatOneAccord]

The fogs aren't attached to the metal brackets??? Or do you mean the mounting holes in the bumper? Those should be there regardless if your car with fogs or not.

[TriniCB7]

no its just the fogs lights alone. they didnt come with the brackets.

[bigtexaz56]

What year are the fog lights 90-91 or 92-93

[92accord ex]

there 92-93

[rustyaccord]

Do you need a JDM bumper in order to install these fogs or can I cut the holes for them in my USDM bumper?

[TriniCB7]

On the backside of the 92/93 bumper there is lines u use as a template to make the cut. Also if youhave the brackets there are mounting points on the back of the bumper as well. Link below has a video that will give you a visual description.

http://youtu.be/xA5cMgsdZag

[rustyaccord]

That will definitely be something I will look into doing in the future if I can score some fogs at the jy.

[Hitchman]

Keep your eyes peeled on ebay, once in a while brackets will pop up, they should definitely fit, just won't have the curvature of the jdm fogs, do you have the harnesses too? And the switch? I saw both of those on ebay recently and hondapartsnow has like one part of the harness I think too

[oni_cb7]

You could make a bracket using plumber's tape (it's not really tape). But it could be used to make a bracket for the fogs. I had the same problem, foglights with no brackets, and was looking into making some brackets for them. However, I was able to come up with some on the classifieds. Members here are extremely helpful and a lot of them have spare parts that they will let go of.

Try posting a WTB thread in the classifieds, that's how I was able to get the right brackets for my fogs.

Good luck finding what you need.

[TriniCB7]

You could make a bracket using plumber's tape (it's not really tape). But it could be used to make a bracket for the fogs. I had the same problem, foglights with no brackets, and was looking into making some brackets for them. However, I was able to come up with some on the classifieds. Members here are extremely helpful and a lot of them have spare parts that they will let go of.

Try posting a WTB thread in the classifieds, that's how I was able to get the right brackets for my fogs.

Good luck finding what you need.

Thanks, I actually did get the brackets from cincy90h22, Guess he saw my post. Really helpful on the matter as well.

Keep your eyes peeled on ebay, once in a while brackets will pop up, they should definitely fit, just won't have the curvature of the jdm fogs, do you have the harnesses too? And the switch? I saw both of those on ebay recently and hondapartsnow has like one part of the harness I think too

Yea I have the switch just not the harness. Been looking for that for some time now. I did see just the part B of the harness on ebay, but not the entire thing. So I'm gonna keep on looking.