Wink mirror

[JAGcb7]

My 5 panel wink mirror vibrates a lot when driving above 50 mph. How can I minimize the vibrations?

[Raf99]

My 5 panel wink mirror vibrates a lot when driving above 50 mph. How can I minimize the vibrations?

duct tape...

[sonikaccord]

And bungee cords...Vibration isolated mounts?

[existlosangeles]

i don't recommend using ducktape, or bungee cords.
it wouldn't help much and wouldn't look so nice either.



if you have the wink mirror mounted to the headliner,
you should be using the old existing screws that
previously were holding up the sun visors.
make sure that they're screwed as tight as possible.




also make sure you do not remove the
sun visor clips because this helps keep the wink mirror
in place and prevents movement or shaking.



the sun visor clips help mount the headliner to the actual body of the car (roof).
the reason the mirror shakes during high speeds is because the HEADLINER
is shaking. prevent that from any movement and you'll have a solid mirror.


another option is instead of mounting it to the ceiling.
mount it onto the windshield like the OEM mirror.
using not one but TWO glass mount kits.



heres a link to purchase them:
http://www.amazon.com/Wink-5-Panel-M...=pd_sim_auto_1

using the glass mount kit enables you to keep your sun visors.
and also holds the wink mirror in place. and looks pretty good in my opinion.

hope that helped

[JAGcb7]

Just order the wink windshield mount, should look cleaner and work efficiently now. Thanks appreciate it.

[Wickit]

Mine has no sunroof clips or anything. Its actually mounted on and sits closer to the windshield and goes into the headliner a little bit.