I started out with this[IMG]
[/IMG]
Then i took a flat head and pryed into the part you see but not too far[IMG]
[/IMG]
[IMG]
[/IMG]
then i took the older handel (what was left) out. To get out use the flat head to push the Thing that connects to the hook that closes the glove box down. Then unscrew the screws that holds the handle in place.
I took my new handle (from junk yard with key
$5) and screwed in place. then shut it
[IMG]
[/IMG]
[IMG]
[/IMG]
Since i had pried the glove box cover open it hung out a little so I used Loctite to fix that
[IMG]
[/IMG]
Thats it!
[/IMG]Then i took a flat head and pryed into the part you see but not too far[IMG]
[/IMG][IMG]
[/IMG]then i took the older handel (what was left) out. To get out use the flat head to push the Thing that connects to the hook that closes the glove box down. Then unscrew the screws that holds the handle in place.
I took my new handle (from junk yard with key
$5) and screwed in place. then shut it[IMG]
[/IMG][IMG]
[/IMG]Since i had pried the glove box cover open it hung out a little so I used Loctite to fix that
[IMG]
[/IMG]Thats it!