300zx seats

[jdmboi type s]

i was just wondering i got of set of 1990 300zx black leather seats they look like racing seats i bought it off a friend of mine for 50 bucks mint anyways the question is well it fit our cbz?

[TypeG]

will they bolt in, no. can they be made to fit through cutting and welding, yes. later.

[jdmboi type s]

will they bolt in, no. can they be made to fit through cutting and welding, yes. later.

cant i just buy the rails on ebay or something 2 fit?

[Tishock]

Z32 have powered seats. You will need to run power to them. They are also set very low in the car so they will have to be modified. Your going to need to weld new brackets for them to sit right. You're also going to need to figure how to mount your seatbelts if you're not going with a harness.

Anything can be done with time, money and ingenuity.

I use to own a Z32. I liked the seats comfort and sporty feel when driving aggressively.

Good luck if you go forward with this.

[jdmboi type s]

do i weld the old seats brackets 2 the 300zx seats? and yea i know how 2 hook up the power to the seats nd im goin with the a harness

[greggydrift]

Oohh that sounds like an exciting project. Wherm might be a little jealous if you get it to work though :P

[jdmboi type s]

do i weld the old seats brackets 2 the 300zx seats? and yea i know how 2 hook up the power to the seats nd im goin with the a harness

? anyone

[deevergote]

Honestly, based on the questions you're asking... I would go to a shop that does custom welding... perhaps a shop that builds performance cars... and have them do it for you. You clearly don't have the first clue about what you're doing. If you do this incorrectly, you could be putting your life in danger.

As for power, that's going to have to be all custom. CBs don't have power seats, so there is no wiring made for it. That's all on you.



For what it's going to take, I'd spend the money on some inexpensive (but quality) aftermarket seats, such as the Corbeau A4.

[jdmboi type s]

Honestly, based on the questions you're asking... I would go to a shop that does custom welding... perhaps a shop that builds performance cars... and have them do it for you. You clearly don't have the first clue about what you're doing. If you do this incorrectly, you could be putting your life in danger.

As for power, that's going to have to be all custom. CBs don't have power seats, so there is no wiring made for it. That's all on you.



For what it's going to take, I'd spend the money on some inexpensive (but quality) aftermarket seats, such as the Corbeau A4.

i was looking at this on ebay http://cgi.ebay.com/ebaymotors/90-96...Q5fAccessories can i just buy this nd drill new holes to fit the cb nd the wiring for the power seats i know how to do

[agol]

why would you spend 200 dollars on new seat brackets when you should already have them on the seat?

[deevergote]

Those brackets are for installing a racing seat in a 300zx.

[HOACB7]

Sorry I know this is off topic, but Deev I love your signature. LMFAO!!!!!!!!!!!!!!!!

[dbales]

from what i've gathered from other people's posts, to make the 300zx seats fit you will need to find some way to mount the cb7 seat bracket to the 300zx seat via welding or some other form of fabrication. if they sit too low like one member posted then you're gonna have to play around with the bracket a little to get it to set right in the cb7. be smart with this because, as someone's already pointed out, your life is at stake if you mess it up.

[jdmboi type s]

damm u guys are right im going 2 have 2 do some crazy fabbing on these seats i think ima start this weekend on fabbing the cb7 seat brak onto the 300zx seats then when i got every rite ill send it 2 get welded up @ this place up my street

[F20A CB7]

can you post a pic of these seats please, i went to the yard and found a 1987 300zx shift knob, it doesnt fit in my hand rite in the cb, but in my friends eg, it was perfect.